Latitude, Artiva or Collect!: Comparing Collection Software Payments
Compare collection software payment integration in Latitude, Artiva and Collect!: posting, payment plans, tokens and how to avoid processor lock-in.

Photo: Pixabay
On this page 7 sections
- What a Collection Software Payment Integration Should Do
- Native Gateways vs. Bring-Your-Own Processor
- How to Compare Latitude, Artiva and Collect!
- Automatic Posting Has to Match the Trust Account
- Token Portability Decides Whether You Can Leave
- Payment Plans, Stored Credentials and Postdated Notices
- Questions to Ask Vendors Before You Sign
Key takeaways
- The integration model (bundled processor, gateway connector, add-on portal or file import) decides who holds your tokens, so identify it before comparing features.
- Get written answers on card-data export before you sign. Stranded tokens can cost more in lost installments and agent time than the rate difference you negotiated.
- Keep payment plan schedules inside the collection system, not the processor's recurring billing, so plans stop when an account closes or is disputed.
- Reversals have to post back automatically, or remittances to clients will overstate what your trust account actually holds.
Collection software payment integration decides more than how fast a payment posts. It also decides whether you can change processors without losing every active payment plan. Latitude by Genesys, Artiva and Collect! all connect to card and ACH processing, and each should be judged on the same four mechanics. Payments should post to the right debtor account and client without rekeying. Plans should run from stored payment data you control. Settlement should reconcile cleanly to your trust account. And stored tokens should be able to follow you if your processor drops you.
That last point matters more for collection agencies than for most businesses. Many processors classify collections as high risk, and terminations happen. An agency whose card data is locked inside one vendor's payment service can lose months of scheduled installments overnight. The sections below cover how to compare platforms on these mechanics and what to get in writing before you sign.
What a Collection Software Payment Integration Should Do
A collection agency takes payments three ways: keyed by agents on the phone, online through a consumer portal, and on a recurring schedule for payment plans. A good integration handles all three from inside the collection system. The agent shouldn't need a second browser tab to charge a card, and nobody should be typing transaction amounts into the account record after the fact.
At minimum, an agent should be able to charge a card or start an ACH debit from the account screen and see the approval or decline there. The integration should store a token, the gateway's stand-in for the card number, so the real number never sits in your database. Each approved payment should post automatically with the gateway's transaction ID and be allocated across principal, interest and fees according to the client's rules. Scheduled installments should run and post the same way. When money comes back out through a chargeback or ACH return, the reversal should post to the account without anyone retyping it.
Phone payments also bring PCI DSS, the card industry's data security standard, into your call center. Call recordings and agent screens are common sources of PCI exposure, which we cover in PCI compliance for collection call centers. An integration that pauses recording during card entry, or lets the consumer enter card digits by keypad, keeps that scope smaller.
Native Gateways vs. Bring-Your-Own Processor
Debt collection software with payment processing usually connects to money in one of four ways. Identify the model first, because it determines who holds your tokens and how hard it is to leave.
| Integration model | Who usually holds card tokens | How posting works | Switching difficulty |
|---|---|---|---|
| Bundled payments from the software vendor or its partner processor | The vendor's payment partner | Built in, usually tight | High: changing processors may mean changing the payment module |
| Gateway connector, where you bring your own merchant account | The gateway you choose | Built in for supported gateways | Moderate: you can change acquirers behind the same gateway |
| Third-party portal or IVR add-on | The add-on provider | API or posting file back to the software | Moderate to high, depending on the add-on contract |
| File-based export and import | Whoever runs the payment system | Batch posting files, often daily | Low technically, but slow and error-prone |
Bundled payments are convenient: one contract, one support line, and posting that just works. The catch is that the vendor's partner sets your underwriting and pricing. If that partner won't take your debt type, or later terminates you, your options inside the software may be thin.
A gateway connector separates the software from the bank. If your platform supports payment gateway connections such as Authorize.net or NMI, the merchant account behind the gateway can come from any acquirer that boards collection agencies on it. Losing an acquirer then means re-underwriting, but your tokens and integration stay put. Before you apply, it helps to know why collection agency merchant accounts get declined.
How to Compare Latitude, Artiva and Collect!
You won't find a reprinted feature grid for the three platforms here, and that's deliberate. Supported gateways change with releases, and they can differ between hosted and on-premises deployments. Payment features are sometimes licensed as separate modules, so the version you run may not have what the current sales sheet shows. The useful comparison is the one you build for your own installation.
Treat Latitude by Genesys payments, Artiva payment processing and the Collect! software payment gateway options the same way: put the identical set of questions to each vendor (listed at the end of this article) and get the answers in writing. Then sort the answers by integration model. A platform that supports several gateways on your exact version, posts both card and ACH automatically, and leaves token storage with a gateway you choose gives you room to move. A platform that only works with its bundled processor may still be the right choice for workflow reasons, but you're accepting lock-in, and that should be priced into the decision.
If two platforms answer the payment questions the same way, weigh the rest of the software, such as workflow, compliance tooling and client reporting, and let payments break the tie. If one platform's answers are vague on token export, treat vagueness as a no until the contract says otherwise.
Automatic Posting Has to Match the Trust Account
Third-party agencies collect money that belongs to their clients. State law and client contracts may require those funds to be held in a trust account, so confirm your obligations with counsel. Processors also often ask to see your licenses and bonds during underwriting, as covered in collection agency licenses and bonds processors ask to see. All of this makes reconciliation stricter than in ordinary retail.
The integration has to tie three numbers together: what the gateway approved, what the software posted and allocated to each client, and what actually landed in the bank. Three settlement details tend to break that chain.
The first is net versus gross funding. If the processor deducts fees from each deposit, the trust account receives less than consumers paid. Ask whether the processor can deposit the full amount and debit fees from your operating account instead. Whether net funding creates a problem depends on your state's rules and your client contracts, so confirm with your attorney or accountant.
Batch cutoffs cause the second break. A payment taken late in the evening may settle in the next day's batch, so posting reports should show the gateway batch ID. That lets your bookkeeper match each deposit to the payments inside it instead of guessing.
Reversals cause the third. A chargeback or ACH return pulls money back out of your account. If the software doesn't post the reversal automatically, your next remittance pays the client for money you no longer hold. The first-party vs. third-party collections distinction also shapes whose merchant account should take the payment, which affects how the trust account fits in.
Token Portability Decides Whether You Can Leave
A token is a reference number. The real card number sits in the gateway's vault, and the token is useless anywhere else. When you change gateways, your stored tokens stop working unless the old gateway securely transfers the underlying card data to the new gateway's vault, a PCI-compliant migration that the new gateway then re-tokenizes.
That transfer only happens if four things line up. Your contract has to give you rights to the stored card data. The outgoing provider has to agree to perform the export, and you should know its fee and timeline in advance. The receiving gateway has to accept imports. And your collection software has to be able to bulk-update tokens on existing plans, because re-linking thousands of plans by hand defeats the point.
Bundled payment services deserve the hardest look here, because the vendor or its partner may hold the vault. ACH works differently. Bank routing and account numbers are often stored in the collection system itself, which makes them easier to move, though they still need to be encrypted and access-controlled.
An Illustrative Cost of Stranded Tokens
These numbers are illustrative, not data from any agency. Assume an agency runs 1,800 active card payment plans. Its processor terminates the account, and the contract gives it no right to export the stored card data.
Every one of those consumers now has to be reached and asked for card details again, within federal and state limits on contacting consumers. Assume agents re-enroll 1,260 of them in the first month. The other 540 plans each miss at least one installment, so multiply 540 by your average monthly plan payment to see that month's shortfall. If each completed re-enrollment takes 15 minutes of agent time, counting failed attempts, that's 315 staff hours, close to two months of one full-time agent's time. Some lapsed consumers never come back at all.
Set that against the rate difference you were negotiating with the processor. Portability is often worth more than a few basis points. If termination has already happened, recovering funds after a collection agency account is terminated covers the next steps.
Payment Plans, Stored Credentials and Postdated Notices
Keep the payment plan schedule in the collection system, not in the processor's recurring billing tool. The collection system knows when an account is paid off, disputed, recalled by the client or flagged for bankruptcy. A processor's subscription engine doesn't, and it will keep charging until someone remembers to cancel it.
Network rules sit underneath every scheduled card payment. The card networks have rules on storing credentials for future use and on retrying declined transactions. Ask your processor which ones apply to your plans and whether the integration supports them, including how it marks payments that belong to a stored-credential series and how its retry logic works.
ACH plans run under Nacha's network rules on authorizations and returns, and phone and online payments each have their own requirements. Our guide to ACH TEL and WEB entries for collection agencies explains both. Federal law also governs recurring debits from a consumer's bank account, so have counsel review your authorization language and confirm what the consumer must receive.
Postdated and scheduled payments raise their own notice questions. Ask counsel what notice obligations apply before you charge them, under federal and state law and under your client contracts. Whatever the answer, the software should generate those notices from the plan schedule, using business-day date logic, rather than relying on someone to send them. This is general information, not legal advice, and state rules are shifting, as covered in CFPB steps back, states step up.
Questions to Ask Vendors Before You Sign
Put these to every software vendor and every processor, and keep the written answers with the contract:
- Which gateways does our exact version and hosting setup support, and do any require an extra module?
- Can we use our own merchant account, or must we use your payment partner?
- Where are card tokens stored, and does the contract give us the right to export the card data, at what fee and on what timeline?
- Do card and ACH payments, chargebacks and ACH returns all post automatically, with transaction IDs and reason codes?
- Can deposits fund gross to our trust account, with fees billed separately?
- Do agent-keyed, portal and IVR payments all follow the same posting path?
- How does the integration handle stored-credential flags and retries on declined installments?
- How are notices for postdated and scheduled payments generated?
If you're also rebuilding the consumer-facing side, self-service payment portals for debtors covers which portal features matter.
The most useful thing to do this week is to pull your current software and processing contracts and find the clause on stored card data. If it's missing or vague, fix that before anything else. MannyPay offers high-risk merchant accounts and works with gateways including Authorize.net and NMI. Request a free quote to see whether your agency qualifies; a MannyPay specialist responds within one business day.
This article is for general educational purposes and is not legal, tax or financial advice. Card network rules and state laws change; confirm current requirements for your business.


