ISO vs. PayFac vs. Direct Processor: Who to Buy From
Comparisons & Buying Guides

ISO vs. PayFac vs. Direct Processor: Who Should You Buy From?

ISO vs. PayFac vs. direct processor: see who underwrites you, who can hold your deposits, and when Visa's $1 million rule changes your contract.

Market stall with rows of bagged dried goods in front as masked shoppers browse a busy, warmly lit shop behind

Photo: Pixabay

On this page 9 sections
  1. ISO vs. PayFac vs. Direct Processor Side by Side
  2. Who Does What in the Payments Chain
  3. What an Independent Sales Organization Actually Sells
  4. How a PayFac Boards You as a Sponsored Merchant
  5. Underwriting Decides When You Find Out About Risk
  6. Pricing: Where Flat Rate Stops Making Sense
  7. Support: Who Answers When Deposits Stop
  8. How to Tell Which One You're Talking To
  9. Matching the Provider Type to Your Business

Key takeaways

  • Before you compare rates, check the signature block. A bank named on the agreement means you have your own merchant account. Terms of service alone mean you're a PayFac's sponsored merchant.
  • Visa's $1 million direct-agreement rule counts only Visa volume. Crossing it adds the acquirer to your contract. It doesn't force you off the PayFac.
  • On an exempt Visa debit card, Visa's table charges $0.95 in interchange on a $100 tapped or dipped sale and $1.80 on the same sale online. A flat rate hides that gap.
  • PayFacs can pause payouts when they see a risk of loss. If your sales come in uneven bursts, approval up front with written limits makes deposits more predictable.

If your business is new, small and simple, a payment facilitator (PayFac) is usually the fastest way to start taking cards. If you have steady volume, sell something PayFacs decline, or can't absorb a surprise hold on your deposits, get your own merchant account through an independent sales organization (ISO). Going straight to a processor pays off mainly when your volume is large enough to negotiate custom terms. In the ISO vs. PayFac decision, the rate matters less than two questions owners tend to skip: whose contract are you signing, and who can stop your money?

ISO vs. PayFac vs. Direct Processor Side by Side

ISOPayment facilitatorDirect processor
Your merchant agreement is withThe acquiring (sponsor) bank, usually with the processor; the ISO sells and services itThe PayFac, as its sponsored merchant (sub-merchant)The processor and its acquiring bank
Merchant IDYour ownAn identifier the PayFac assigns under its accountYour own
Typical approval timeDaysOften minutesDays to weeks
When the deep review happensBefore you go liveBasic checks at signup, closer scrutiny once you processBefore you go live
Typical pricingNegotiable: interchange-plus, flat rate or cost programsPublished flat rateNegotiable at high volume
Typical contractFixed terms are common; check exit feesUsually month-to-monthFixed terms are common
High-risk categoriesThrough specialized bank programsExcluded by most PayFacsCase by case

The table shows common market patterns, not network rules. Each provider's agreement sets its actual terms.

Who Does What in the Payments Chain

Card networks such as Visa and Mastercard write the rules and route transactions. The issuing bank gave your customer the card. On your side sits the acquiring bank, also called the sponsor bank. A bank stands behind every card sale you take, even through a PayFac. The processor moves each sale from authorization to settlement on the acquirer's behalf.

ISOs and PayFacs sit in front of that chain. Visa counts both as third party agents. Its Third Party Agent Registration Program requires agents that sign up merchants to be registered before acquirers can use them. Neither one replaces the bank, so "my processor froze my account" is often wrong. The decision usually came from the sponsor bank's risk team or from the PayFac's own risk rules. Our explainer on choosing between a bank, an ISO or a payment facilitator covers each role in more detail.

What an Independent Sales Organization Actually Sells

Visa's TPA functional descriptions describe the merchant-side ISO's role: signing up and selling to merchants, customer service, merchant training and, in some cases, selling POS terminals. Buy through an ISO and you get your own merchant account. That means a merchant ID (MID) issued under the bank's program and tied to your business. The bank approves it based on your business type, your merchant category code and your expected volume.

The ISO's core job is matching you with a bank program that will approve your business. After that it prices the account and supplies equipment or a gateway. A good ISO knows which bank says yes to a high-risk merchant account or a jewelry store with large tickets. It also packages the application so it clears underwriting the first time.

Agents, sometimes called sub-ISOs, resell an ISO's programs. That's common, but it puts one more party between you and the bank, so ask who services the account after the sale.

How a PayFac Boards You as a Sponsored Merchant

Visa's payment facilitator model lays out the PayFac's job. It contracts with an acquirer and signs a merchant agreement with each seller on the acquirer's behalf. It monitors those sellers, receives settlement from the acquirer and pays them out. Visa calls you a "sponsored merchant." You don't sign anything with the bank. You accept the PayFac's terms.

Being a sub-merchant doesn't lower the bar. Visa's model says all Visa merchant requirements apply equally to sponsored merchants. The Visa Merchant Data Standards Manual also requires the PayFac to review each seller's business and assign the most appropriate MCC. What changes is speed. Onboarding is usually automated, and pricing is a single published rate. For a food truck testing a new market or a consultant sending a few invoices a month, that's hard to beat.

Visa does let some PayFacs board riskier sellers. Its functional descriptions define a "High Integrity Risk Payment Facilitator" approved for high-integrity-risk categories. Most mainstream PayFacs still exclude long lists of businesses, so read the prohibited list before building your checkout around one.

The $1 Million Visa Rule, and What It Doesn't Mean

Section 5.3.1.4 of the Visa Core Rules covers PayFac sellers that exceed USD 1 million in annual transaction volume. The acquirer must sign a direct merchant agreement with any such seller. For a seller new to the PayFac, that happens before processing begins. For an existing seller who grows past the line, the acquirer has two years after the volume is exceeded, according to Celer Merchants' summary of the rule. The rules list exceptions.

Two parts of this rule are widely misread. First, the threshold counts Visa volume, not all your card sales. Second, crossing it doesn't push you off the platform. Visa's model notes that sponsored merchants can keep the PayFac for acceptance and settlement once the acquirer signs on directly. Mastercard sets its own threshold in its rules, and published summaries disagree on the figure. Ask any PayFac for its Mastercard number in writing.

Worked example (illustrative numbers). Assume a home goods store sells $1,500,000 a year on cards and 60% of that volume runs on Visa. Visa volume is $1,500,000 × 0.60 = $900,000, under the line. If sales grow 20% to $1,800,000 with the same card mix, Visa volume becomes $1,080,000. The acquirer must then add a direct agreement within the window the rules allow. At that size, the store should also get quotes for its own merchant account, because it's large enough to negotiate.

Our comparison of a merchant account vs. a payment aggregator covers the other differences in how the two are set up.

Underwriting Decides When You Find Out About Risk

Underwriting is the bank's decision about whether to carry your risk. Chargebacks are the main exposure. Businesses paid long before they deliver add another one. Event promoters and custom furniture makers are examples: if they fail before delivering, refunds flow back through the bank.

With an ISO or a direct processor, most of the review happens before you process a dollar. Expect an application and a voided check or bank letter. Bring recent processing statements if you're switching, and sometimes business financials. Your approved monthly volume, average ticket and any reserve are set up front. Exceed those numbers later and the account goes into review, but you knew the limits going in.

A PayFac does check you at signup, since Visa expects due diligence when sponsored merchants are signed. The checks are lighter and faster. The heavy scrutiny comes later, when something unusual happens: a large ticket, a sudden volume spike, a cluster of refunds or disputes. Visa's PayFac risk guide says a PayFac "may temporarily suspend a seller's settlement proceeds" when it believes paying the seller could cause a loss, as Checkout Chronicle quotes it. That's when holds and closures happen, often with little warning.

Neither model is unfair; they put the review at different points. Some sales come in big, uneven bursts, like a contractor collecting large deposits or a gift shop that does most of its year in December. For those businesses, approval up front with written limits makes deposits more predictable.

Pricing: Where Flat Rate Stops Making Sense

PayFacs charge one flat rate that bundles every underlying cost with their margin. The biggest underlying cost is interchange, the fee paid to the card-issuing bank on each sale. ISOs and direct processors offer interchange-plus pricing as an alternative to flat rate. It passes interchange through at cost and adds a disclosed markup. Many ISOs also offer programs that offset processing costs. MannyPay, for example, offers dual pricing and cash discount programs. It also offers surcharging where state law and card network rules permit it.

Interchange varies more than most owners realize. Visa's U.S. interchange table shows the gap on an exempt Visa debit card. It costs 0.80% + $0.15 under the CPS/Retail program (card present) and 1.65% + $0.15 under CPS/Card Not Present. On a $100 sale, that's $0.95 in store against $1.80 online. A flat rate hides that gap inside one number. Interchange-plus shows it on your statement, so look at how card-present and card-not-present fees differ before you choose. For a channel-by-channel look at two providers, see our Stripe vs. Square comparison for online, in-person or both.

Choosing between flat rate and interchange-plus means weighing a fixed monthly fee against a lower percentage. Interchange-plus accounts often carry monthly fees that flat-rate accounts skip, while the flat rate charges more on every dollar. Divide the extra monthly fee by the gap in percentage points and you have your break-even volume.

Illustrative example, not a quote from any provider. Assume interchange-plus costs you half a percentage point less than a PayFac's flat rate on your mix of cards. Assume the interchange-plus account also carries a $25 monthly fee and per-transaction fees are identical. Break-even is $25 ÷ 0.005 = $5,000 in monthly card volume. Below that, the flat rate wins. Above it, every additional dollar of card sales saves you half a cent.

Pull your real gap from your statement and compare merchant processing quotes side by side before switching.

Support: Who Answers When Deposits Stop

Picture a Saturday night when a restaurant's terminal won't batch and the tip adjustments haven't posted. PayFacs lean on self-serve help centers and chat, which works for simple setups. ISOs vary. Some assign a named rep who knows your account, and others hand you to the processor's call center after you sign. Direct processors give large merchants relationship managers and put smaller ones in a queue. Integrated setups feel this most, such as a store running checkout on Shopify through a third-party gateway. Ask who supports the equipment and who handles funding questions, because those are often different companies.

How to Tell Which One You're Talking To

Websites rarely say it plainly. The paperwork does.

  1. Read the signature block of the merchant agreement. A bank named as a party means you're getting your own merchant account through an ISO or processor. If you only click through one company's terms of service, with no bank signature, you're a sponsored merchant.
  2. Look for a sponsor bank disclosure. Registered ISOs name their banks. MannyPay, for instance, is a registered ISO/MSP of Esquire Bank, Merrick Bank and Mission Valley Bank.
  3. Check the descriptor format. The descriptor is the business name on your customers' card statements. Visa's data standards let a PayFac show its name, an asterisk, then yours (for example, "PayFacName\*YourShop"). If a provider's sample descriptor looks like that, you're under its account.
  4. Notice what the application asks for. Requests for processing statements and expected monthly volume point to underwriting up front. Instant approval with no volume questions points to a PayFac.
  5. Confirm whether the MID is yours, or whether you'll process under the provider's master account.
  6. Find out who you'd call about a fund hold, and whether that person can see the bank's risk notes.

Evasive answers are a warning sign. Our list of questions to ask a merchant service provider covers termination fees and equipment leases. A merchant agreement is a legal contract, so have an attorney review terms you don't understand.

Matching the Provider Type to Your Business

Start with a PayFac if you're new and want to test demand before signing a contract. Move to an ISO when any of these apply:

  • Your volume clears your break-even point.
  • You need specific terminals or a cost program.
  • PayFacs reject your category.
  • A surprise hold would put payroll at risk.

Go to a processor directly once your volume is large enough to negotiate custom terms. If your Visa volume is heading toward $1 million a year, plan the move on your own schedule before the rule sets one for you.

Before your next renewal or switch, pull your last three statements and calculate your effective rate: total fees divided by total card volume. Then put the six questions above to each provider you're considering. For an ISO's numbers to compare against, request a free quote from MannyPay; a specialist responds within one business day.

Sources

  1. Visa Core Rules and Visa Product and Service Rules
  2. Visa's Payment Facilitator Model
  3. Visa Third Party Agent Registration Program: TPA Types and Functional Descriptions
  4. Visa Account Information Security Program and PCI (Third Party Agent Registration Program)
  5. Visa Merchant Data Standards Manual
  6. Visa USA Interchange Reimbursement Fees
  7. Celer Merchants: Merchant Account vs Payment Facilitator (PayFac)
  8. Checkout Chronicle: Payment Facilitator vs ISO: The Contract Decides Who Holds Funds

About the author

Daniel Foster

Daniel Foster is Product & Payments Technology Editor for Beyond the Swipe, covering POS systems, payment gateways, virtual terminals, mobile payments and integrations.

This article is for general educational purposes and is not legal, tax or financial advice. Card network rules and state laws change; confirm current requirements for your business.

Related reading