EBT Card Skimming: How Grocers Protect Shoppers' SNAP Benefits
EBT card skimming drains SNAP benefits at grocery PIN pads. See USDA inspection guidance, chip EBT terminal prep and what to do if you find a skimmer.

Photo: Pixabay
On this page 7 sections
- Why EBT Card Skimming Targets Grocery Lanes
- The Rule Staff Get Wrong: Skimmed Benefits Aren't Refunded Like a Card Dispute
- What an EBT Skimmer Looks Like on a Grocery PIN Pad
- Chip EBT Cards Need a Software Update, Not Just a Chip Reader
- A Lane Inspection Routine Built Into Opening and Shift Change
- When You Find a Skimmer or a Customer's Balance Is Gone
- Make the Chip EBT Call This Week
Key takeaways
- Federal money replaced skimmed SNAP benefits only for thefts through December 20, 2024. Staff shouldn't promise customers a refund.
- A terminal that reads Visa and Mastercard chips can't read chip EBT cards until its software recognizes them. Ask your processor about chip EBT for each lane.
- USDA wants PIN pads inspected at least daily. In an illustrative six-lane store, that comes to about four staff hours a week.
- If you find a skimmer, stop using the device and call the police, your equipment provider and the USDA OIG Hotline at (202) 690-1622.
EBT card skimming is the theft of SNAP benefits through devices that criminals attach to checkout PIN pads to copy a card's magnetic stripe along with the PIN typed after it. Grocers are the front line: USDA tells SNAP retailers to inspect PIN pads at least daily and to turn away service visits they didn't schedule. The stakes rose on December 20, 2024, when federal replacement of skimmed SNAP benefits ended. A household whose card gets cloned at your lane will probably not get that money back.
Why EBT Card Skimming Targets Grocery Lanes
Credit and debit cards moved to EMV chips years ago. A chip creates a one-time code for each transaction, so copied chip data is close to useless for counterfeiting; our explainer on the EMV liability shift and counterfeit card fraud covers that history.
Most EBT cards in circulation still depend on the stripe, which holds static data. A 2025 GAO report on SNAP EBT card security describes the crime in two steps. Skimming means placing a reader on a retailer's point-of-sale equipment to collect the card number and PIN when a shopper swipes. Cloning means writing that data onto a blank magstripe card. USDA's stolen benefits page adds the last step: thieves spend the fake cards on food at SNAP-authorized stores. Benefits skimmed at your lane end up spent at another store's register.
Grocers carry more of this risk than most retailers. States load benefits on published schedules, which tells thieves when balances peak. A busy lane runs a steady stream of EBT swipes, so one compromised device collects cards fast. PIN pads on swivel stands and at self-checkout get handled by hundreds of strangers a day.
The Rule Staff Get Wrong: Skimmed Benefits Aren't Refunded Like a Card Dispute
Cashiers facing a declined EBT card often tell the customer the state will refund the money. For thefts after December 20, 2024, that is wrong in most places.
The Congressional Research Service explains that the consumer protections covering unauthorized credit and debit transactions don't apply to EBT cards, and SNAP's permanent law provides no federal money to replace stolen benefits. The Consolidated Appropriations Act of 2023 created a temporary exception for benefits stolen from October 1, 2022, onward. It was set to lapse September 30, 2024, and a continuing resolution stretched it to December 20, 2024. West Virginia's Department of Human Services noted that the American Relief Act, 2025, signed December 21, 2024, did not extend it.
Some states run replacement programs with their own funds, according to FindLaw's summary. Learn your state's current policy and put it in staff training. For everyone else, your PIN pad is the shopper's main protection.
What an EBT Skimmer Looks Like on a Grocery PIN Pad
USDA's retailer notice on card skimming warns that skimmers are built to look like part of the terminal and take less than a minute to attach.
| Device | How it works | What staff notice |
|---|---|---|
| Full overlay | A plastic shell snaps over the PIN pad and reads the stripe | Terminal looks bulkier, edges don't line up, color is slightly off |
| Keypad overlay | A thin fake keypad records each PIN | Keys sit higher than normal or feel spongy |
| Deep-insert skimmer | A thin reader hides inside the card slot | Cards feel tight going in |
| Hidden camera | A pinhole lens records PIN entry | New stickers, brackets or signs near the keypad |
| Device swap | A modified look-alike replaces the terminal | Serial number doesn't match records; a seal is missing |
Because EBT data is still mostly read from the stripe, overlays and deep-insert readers are today's main threat. Shimmers, which sit in the chip slot, matter more as chip EBT spreads.
The usual installation is a two-person job: one shopper distracts the cashier with a price question while the other snaps on an overlay. Swaps happen after hours or at an unwatched self-checkout; our guide to self-checkout costs and shrink for small grocers covers staffing those lanes. A fake technician who arrives to "update" the terminal is another route, which is why USDA says not to allow unscheduled service visits. Insiders are a risk as well, since someone can pay an employee to install a device or look away, so the controls in preventing employee theft in a retail store apply here.
Chip EBT Cards Need a Software Update, Not Just a Chip Reader
Chip EBT is arriving state by state. California went first, mailing cards with both chip and tap in 2025. The National Grocers Association's EBT chip tracker lists Alabama, California, Maryland, Massachusetts, Michigan, New Jersey and Oklahoma, with Arkansas, Oregon and Virginia among states in progress or planned for late 2026 and early 2027. Your state EBT agency's retailer notices have exact dates.
Many grocers assume that a terminal that reads Visa and Mastercard chips will also read chip EBT. It won't on its own. The NGA says plainly that EBT chip requires POS software updates. The Merchant Advisory Group reported that the cards use their own application identifier (A0000000044542), new to the payment system, so terminal software has to be configured to recognize it. The MAG also noted that California's cards support contact and tap, while Oklahoma planned contact-only cards.
That gap shows up at the lane. San Bernardino County tells California cardholders to tap or insert before swiping and warns that some retailers can't take chip or tap yet. If your terminal forces a swipe, the shopper's stripe data is exposed at your counter even though the state paid for a safer card.
Ask your processor or EBT equipment provider one question, "Will every lane process chip and tap EBT in my state?", and act on the answer:
| What your provider says | What to do |
|---|---|
| Certified and already enabled | Run a test transaction; confirm the terminal prompts for insert or tap |
| Hardware supports it, software needs an update | Schedule the update before your state's mass card mailing |
| Device can't be updated | Budget for replacement and ask about lead times now |
| EBT runs through an integrated POS | Get confirmation from both the POS vendor and the processor |
Our guide to accepting EBT at your grocery store explains how EBT flows through your setup. If you're replacing hardware, compare PIN pads for grocery checkout lanes and smart terminals for retail counters, and get chip EBT support confirmed in writing for each model.
Keep inspecting after chip arrives. Chip EBT cards still carry a stripe, and old magstripe cards stay in wallets through the transition.
A Lane Inspection Routine Built Into Opening and Shift Change
USDA sets the floor at a daily inspection. Assign it to named people and log it.
Daily, at opening and each shift change:
- Compare each PIN pad to a reference photo taken at installation: color, logo placement, slot shape, keypad height.
- Tug the card slot and keypad edges. A real terminal feels solid; overlays flex or lift.
- Insert a test or expired card and feel for resistance.
- Confirm serialized tamper-evident seals are intact and match the logged numbers.
Weekly:
- Match serial numbers on the label, and on the settings screen if there is one, against your inventory.
- Check for extra cables or adapters, and look under the counter and stand.
- Review footage for anyone handling a PIN pad without buying. Aim cameras at who approaches the terminal, never at the keypad, since recorded PINs create a new risk.
- Count your locked-up spares. A stolen spare can be modified at leisure and swapped in later.
PCI DSS, the card industry's security standard, includes requirements for protecting card-reading devices from tampering and substitution; ask your processor which apply to you.
Worked example (illustrative). Assume six lanes (two of them self-checkout), two daily checks per lane at two minutes each, and a ten-minute weekly deep check per lane. Daily checks: 6 × 2 × 2 = 24 minutes a day, or 168 minutes a week. Deep checks: 6 × 10 = 60 minutes. Total: 228 minutes, about 3.8 staff hours a week. Put those hours on the schedule as a named task instead of hoping they fit between other jobs.
Treat customer comments as a free extra inspection. If a shopper says the card stuck or the keypad felt odd, close the lane and check it.
When You Find a Skimmer or a Customer's Balance Is Gone
USDA's retailer notice is specific about a found skimmer or signs of tampering: stop using the device and immediately call your local police, your POS equipment provider, and the USDA Office of Inspector General Hotline at (202) 690-1622. Photograph the device in place and touch it as little as possible. Save footage back to your last clean inspection, then check every other terminal, spares included. Keep the police case number with your inspection logs, since together they show you took reasonable steps.
Shoppers often discover the theft at your register. Move the conversation away from the line and don't guess where the card was skimmed. Point them to the number on the back of their EBT card to report it stolen and change the PIN. USDA encourages state agencies to offer card security options, which in some states include locking the card between purchases, so suggest they ask about it.
Replacement questions go to the local SNAP office, since state policy now decides them. Note the lane and the time of the decline, and inspect that lane at once if a second customer reports trouble after using it. A printed card at customer service with your state's EBT phone number spares staff from improvising.
Reporting skimming is unrelated to SNAP trafficking, but the retailer compliance stakes there are serious; see how grocers lose EBT authorization over trafficking charges. This article is general information, not legal advice. Confirm your obligations with your state agency and a qualified professional.
Make the Chip EBT Call This Week
On Monday, ask your processor whether every lane will take chip and tap EBT in your state, and get the answer in writing. The open question to watch is whether Congress restores federal replacement of stolen benefits; until it does, your PIN pads are the shopper's best defense. If the answer is new hardware, MannyPay works with grocery markets on POS systems, terminals and payment processing. Request a free quote and a MannyPay specialist will respond within one business day.
Sources
- Supplemental Nutrition Assistance Program (SNAP): Benefit Theft Through Electronic Benefit Card Skimming (Congressional Research Service)
- DoHS Announces End to SNAP Stolen Benefits Replacement (West Virginia DoHS)
- What To Do if Your SNAP Benefits Were Stolen (FindLaw)
- Addressing Stolen SNAP Benefits (USDA)
- SNAP Retailer Notice: Card Skimming (USDA)
- SNAP EBT Card Security, GAO-25-107964 (U.S. Government Accountability Office)
- EBT Chip Cards (National Grocers Association)
- EBT Chip Cards: Ready or Not, Here They Come (Merchant Advisory Group)
- New EBT Card Security & Technology Upgrade (Contra Costa County EHSD)
- EBT Cards Equipped With Chip/Tap Technology Coming Soon (San Bernardino County)
This article is for general educational purposes and is not legal, tax or financial advice. Card network rules and state laws change; confirm current requirements for your business.


