Accept International Credit Cards: Fees and Approvals
Payment Processing Fundamentals

Accepting International Cards: Cross-Border Fees and Approvals

Before you accept international credit cards, learn the cross-border fees, why foreign cards decline more, and when multi-currency pricing pays off.

Bins of roasted coffee beans with metal scoops and chalkboard price signs for Ethiopian and Costa Rican coffee

Photo: Pixabay

On this page 7 sections
  1. What Counts as a Cross-Border Transaction
  2. Cross-Border Fees: The Three Layers on Your Statement
  3. Run the Numbers: Fees vs. Lost Approvals
  4. Why Foreign Cards Decline More Often
  5. Multi-Currency Processing and Dynamic Currency Conversion
  6. Fraud Controls That Don't Block Good Foreign Orders
  7. Choosing a Processor to Accept International Credit Cards

Key takeaways

  • A foreign card costs more in three layers: network assessments, international interchange and your processor's markup. Only the first two come from the card networks.
  • Better approvals outearn the whole cross-border fee bill once your reachable approval gain exceeds your approval rate times the fee gap, divided by your margin.
  • Pricing in a shopper's currency pays off only when the added sales cover the conversion cost. Work out that break-even before you turn it on.
  • Fraud rules built for U.S. cards, especially strict address verification, decline good foreign orders. Use 3-D Secure and location signals instead.

A standard U.S. merchant account that takes Visa and Mastercard already lets you accept international credit cards. Those sales cost more, and fewer of them get approved. Three things drive the extra cost: network fees on cards issued outside the U.S., separate international interchange, and your processor's markup. The approval gap comes from the foreign bank, which sees a U.S. merchant and scores the sale as riskier. Both problems are manageable. Treat them separately, because a lower fee won't raise approvals and better authentication won't lower fees.

What Counts as a Cross-Border Transaction

A sale is cross-border when the bank that issued the card sits in a different country from the bank that holds your merchant account. The customer's location doesn't decide it, and neither does the currency on the receipt. A tourist from Germany tapping a German card at your Miami gift shop makes a cross-border sale. So does a Canadian ordering from your website. A U.S. traveler paying with a U.S. card on your site from a café in Paris does not.

Two facts about each sale drive the fees. The first is where the card was issued, which your processor reads from the first digits of the card number, called the BIN (bank identification number). The second is the transaction currency. If you price and settle only in U.S. dollars, every sale is in dollars, foreign card or not. Show prices in euros or pounds and the transaction itself is in that currency, which adds a second fee layer.

The fee your customer sees on their own statement is a separate charge. Their bank's foreign transaction fee comes out of their pocket, not yours. Our explainer on cross-border fees vs. foreign transaction fees sorts out who pays which one.

Cross-Border Fees: The Three Layers on Your Statement

Foreign card processing fees reach you in three layers, and each comes from a different place. Keep them apart when you read a statement or compare quotes.

Network Assessments

Visa and Mastercard each charge an extra assessment when the issuing bank and your bank are in different countries. On an interchange-plus statement it shows up as its own line, labeled as an international or cross-border assessment, with wording that differs by processor. Both networks charge more when the transaction currency also differs from your settlement currency. These are network fees, so every U.S. acquirer pays them. The networks revise their fee schedules, so get the current amounts from your processor instead of relying on an old quote. American Express and Discover price foreign cards under their own terms.

International Interchange

Interchange is the fee that goes to the cardholder's bank. Sales between regions fall under the networks' international interchange tables instead of the U.S. tables. Foreign debit cards are where merchants get surprised: the low rates on debit cards from large U.S. banks don't carry over to a debit card issued abroad, so a foreign debit sale costs far more than a domestic one. On credit cards, the difference depends on the card product and on whether the card was present or keyed online. Read the interchange line on your statement instead of assuming.

Your Processor's Markup

This layer is one processor's pricing, not a network rule. Pricing models differ. One processor passes the network assessments through at cost, another folds everything into a single "international fee" percentage, and flat-rate providers add a fixed surcharge to any foreign card. None of these models is wrong in itself. Know which one you're paying, and get it in writing.

Run the Numbers: Fees vs. Lost Approvals

Merchants spend hours negotiating cross-border fees and minutes looking at foreign declines. Four figures from your own reports show which deserves the effort:

  1. Attempted foreign volume. From your gateway, pull a month of attempted payments on foreign-issued cards, sorted by BIN country, and note the share approved.
  2. Fee gap. From your statement, work out what approved foreign sales cost in total fees, minus what the same volume would cost on domestic cards. Express it as a percentage of volume.
  3. Monthly cross-border cost. Multiply approved foreign volume by the fee gap.
  4. Value of better approvals. Multiply attempted foreign volume by the approval gain you think you can reach, then by your gross margin.

Compare lines three and four. Simplify the math and attempted volume cancels out, which leaves a clean rule: better approvals outearn your entire cross-border fee bill once the approval gain exceeds your current approval rate times the fee gap, divided by your gross margin. When your margin is many times larger than the fee gap, the break-even gain is a small fraction of your approval rate. That's why the decline report deserves your attention before the fee negotiation.

Check the result against our authorization rate benchmarks by business type to see whether your overall approval rate already lags.

Why Foreign Cards Decline More Often

International decline rates run higher, and the causes sit with the issuing bank and with your own fraud settings:

  1. The issuer's fraud model flags the merchant. A card with no history of charges outside its home country makes a U.S. merchant look unusual, and fraud models decline unusual.
  2. The card is switched off for foreign or online use. Issuers in a number of countries ship debit and prepaid cards that way, and the cardholder has to turn on international use in their banking app.
  3. The issuer expects authentication. European issuers expect online payments to arrive with strong customer authentication, and 3-D Secure carries it. A sale sent without that data draws more declines.
  4. Address checks don't fit. Address verification (AVS) was built around U.S.-style addresses, and many foreign issuers support it partly or not at all. If your gateway declines every AVS mismatch, it rejects good foreign orders before the issuer ever sees them.
  5. The billing descriptor is unclear. A cardholder who gets a fraud alert for a merchant name they don't recognize tells the bank to block it.

For European cards, turning on 3-D Secure authentication is the biggest lever. It sends the issuer the data it wants, and under network rules a successfully authenticated sale moves fraud chargeback liability to the issuer. Our 3-D Secure 2 explainer shows how to apply it without putting a challenge screen in front of every buyer. If one country makes up a large share of your foreign sales and approvals there stay low after authentication, processing through a bank in that country is the next option to test. We weigh it in local acquiring vs. cross-border processing.

Multi-Currency Processing and Dynamic Currency Conversion

Multi-currency processing covers two different setups. The difference decides who picks the currency and who keeps the conversion markup.

Showing Prices in the Shopper's Currency

With shopper-currency pricing, your site shows a UK customer prices in pounds and charges the card in pounds. Your processor converts the money, earns a spread on the exchange rate, and settles to you in U.S. dollars unless you've arranged foreign-currency settlement. The shopper sees a familiar price. Pricing in pounds doesn't remove the shopper's foreign transaction fee, though. Their bank sets that fee, and some banks charge it on any merchant located abroad, whatever the currency.

Whether this pays off is a break-even question. Divide your monthly conversion cost by your gross margin. The result is the added foreign sales you need each month just to cover it. If one currency brings enough traffic to measure a lift of that size, test it against your current dollar pricing. If foreign orders trickle in from dozens of countries, the lift per currency is too small to measure, and you won't be able to prove the setup pays.

Watch two side effects. Refunds get converted at the exchange rate on the refund date, so a full refund in pounds costs you more dollars than you received if the rate has moved against you. And sales tax, VAT and duties don't go away because you priced in euros, as our guide to EU VAT for U.S. sellers explains. When one currency grows into a large share of sales, holding it instead of converting is worth a look. Our piece on multi-currency merchant accounts covers the math.

DCC at the Front Desk

Dynamic currency conversion (DCC) happens in person. The terminal recognizes a foreign card and offers the cardholder a choice: pay in dollars or in their home currency at a stated rate. It shows up at hotel front desks, tour counters and airport shops, where foreign cards are common. The card networks set rules for DCC built around disclosure and cardholder choice, so confirm the current requirements with your processor before you offer it.

The DCC rate carries a conversion markup that the cardholder pays in place of their own bank's conversion. Guests who feel pushed into it complain, and some dispute the charge. For a hotel, DCC also complicates authorization holds, because a hold placed in one currency and adjusted later in another is harder to explain at checkout. Our article on incremental authorization for tabs and stays covers how holds change during a stay. If you offer DCC, train staff to present it as a neutral choice. For disputes over no-shows, cancellations and damage, see our guide to defending hotel chargebacks.

Fraud Controls That Don't Block Good Foreign Orders

Foreign orders carry more fraud risk, and disputes from abroad are harder to fight. Read how to win international chargebacks before you need it. Even so, blunt rules cost you good revenue. Keep the checks that work everywhere and drop the ones that only work for U.S. cards.

Start with address verification. Relax AVS for countries where issuers don't support it, but keep requiring the card security code on every order. Send risky-looking orders through 3-D Secure instead of declining them outright, so the issuer confirms the cardholder.

Next, compare three locations: the card's issuing country, the shopper's IP address and the shipping destination. A Canadian card shipping to Canada from a Canadian IP is ordinary. A card from one country, an IP in a second and a parcel forwarder in a third deserves a manual review.

Then screen names and destinations. U.S. sanctions law restricts sales into certain countries and to certain listed parties. Our OFAC screening guide for online sellers lists what to check. Treat it as general information and confirm your obligations with a qualified professional.

Your industry decides which signals you have. Travel businesses take high-ticket bookings weeks before the trip, so a stolen card looks clean until the chargeback arrives. Digital products and software deliver instantly with no shipping address, which leaves 3-D Secure, IP data and velocity limits as the main defenses. E-commerce stores shipping physical goods have the most signals, so they should use all of them before declining a sale.

Choosing a Processor to Accept International Credit Cards

Taking the card is the easy part. Processors differ on pricing transparency and approval tools, so ask any provider, including us, these questions:

  1. Do you pass Visa and Mastercard cross-border assessments through at cost, or charge a flat international fee? Show me a sample statement.
  2. Can I see approvals and declines broken out by card country?
  3. Do my gateway and shopping cart support 3-D Secure, and can I apply it selectively?
  4. Can I show prices in other currencies, what is the conversion spread, and which currencies can I settle in?
  5. Is local acquiring available in the countries where most of my foreign customers live?

MannyPay's international payment processing includes multi-currency acceptance, cross-border acquiring paths, a review of USD versus local-currency settlement, and documentation support. Some non-U.S. businesses may qualify for a U.S. merchant account, depending on underwriting.

Your most useful next step is a month of foreign-card declines broken out by country. If one or two countries account for most of them, that report tells you whether to fix authentication, loosen fraud rules or look at local acquiring. Bring it and a recent statement when you request a free quote, and a MannyPay specialist will respond within one business day.

About the author

Adrian Reyes

Adrian Reyes is Senior Payments & Fintech Editor for Beyond the Swipe, covering credit card processing, merchant accounts, payment technology and processing fees.

This article is for general educational purposes and is not legal, tax or financial advice. Card network rules and state laws change; confirm current requirements for your business.

Related reading