B2B Buy Now Pay Later: Costs vs. Factoring and Net Terms
Payment Processing Fundamentals

B2B Buy Now, Pay Later: Offer Net Terms With Less Credit Risk

B2B buy now pay later lets buyers take net 30 to 90 terms while you get paid at shipment. Compare published fees, non-recourse limits and break-even math.

Red manual pallet jack with a 2000 kg load sticker sliding under a wooden pallet on a concrete warehouse floor

Photo: Pixabay

On this page 6 sections
  1. How B2B Buy Now, Pay Later Differs From Consumer BNPL
  2. From Checkout to Payout: How a Financed Order Moves
  3. What B2B BNPL Costs and What Non-Recourse Leaves With You
  4. B2B BNPL vs. Invoice Factoring vs. In-House Net Terms
  5. Checkout and Invoice Integrations to Ask About
  6. Break-Even Math: When Net Terms Pay for Themselves

Key takeaways

  • One provider, Resolve, publishes net 30 fees from 3.15% with a 90% advance up to 3.5% with a full advance. That is one company's pricing, not a network rule, so get your own quote for each term length in writing.
  • In an illustrative distributor at a 30% margin, a 3.5% fee means orders have to grow about 13% to break even. At a 15% margin they have to grow about 30%. If the buyer used to pay by card, they only have to grow about 4%.
  • Non-recourse protection comes with exclusions. Read the dispute, fraud and returns clauses before the fee schedule.
  • Federal Regulation Z exempts business-purpose credit. A growing number of states, including California, New York and Utah, now require commercial financing disclosures, and those duties fall on the provider.

B2B buy now pay later lets your business customers take net 30, 60 or 90 terms. Meanwhile a third-party provider pays you for the order, minus a fee, once it ships or is delivered. The provider approves the buyer, carries the invoice and collects it. On a non-recourse program it also takes the loss when an approved buyer can't pay, within the exclusions written into your contract.

So the credit risk gets smaller but doesn't go away. Whether the deal pays off depends on two things: what the contract still leaves you holding, and whether orders grow enough to cover the fee. You can check both before you sign, using a provider's published pricing and your own margins.

How B2B Buy Now, Pay Later Differs From Consumer BNPL

Consumer BNPL splits one shopper's purchase into a few installments and decides on that person's credit at checkout. B2B programs are often sold as net terms financing or trade credit, and they follow the way companies buy. Your buyer gets a credit line that covers repeat orders, and each order becomes an invoice due on a fixed date. Some providers also offer installments. American Banker's 2022 profile of Slope described a $1,200 wholesale shipment the buyer could pay in three installments over up to 60 days, with Slope paying the seller on delivery.

That structure changes what gets underwritten. A wholesale reorder or a contractor's materials run is bigger than a consumer cart and comes back every few weeks. That makes the size of the line more important than any single approval. Providers judge the business on its credit file and bank data rather than the owner's personal score. Repayment is different too. Your customer's accounts payable team pays the provider like any other vendor, matching the invoice number to its own purchase order.

The legal rules are different as well. Under the Truth in Lending Act, Regulation Z exempts credit extended primarily for a business, commercial or agricultural purpose (12 CFR 1026.3(a)). That means the federal disclosures shoppers get on consumer BNPL don't apply. States have filled part of that gap with commercial financing disclosure laws, starting with California's SB 1235. The American Bar Association's state survey tracks when each law took effect.

Utah's and New York's took effect in 2023. Laws in Florida, Georgia, Kansas and Connecticut followed in 2024, and Florida's applies to transactions consummated on or after January 1, 2024. Missouri's law took effect no earlier than February 28, 2025. A March 2026 Venable review counts ten states, Virginia and Texas among them, that require some form of disclosure, with bills pending in others.

Scope varies by state. New York's law, for example, covers offers of $2.5 million or less and applies to factoring as well as loans. The disclosure duties fall on the financing provider, not on you as the seller. Whether a given program is covered depends on how it's structured and where the buyer is based. This is general information, so ask a lawyer how it applies to the program you pick.

From Checkout to Payout: How a Financed Order Moves

The steps are about the same from provider to provider. Steps 3 through 5 contain the details that affect your cash flow and your customer relationships.

  1. Application. The buyer applies at your online checkout. Customers who order by phone or email apply through a link you send them. Small lines get a fast decision; large ones get a closer look.
  2. Order and term. Net 30 is the usual default. A longer term raises either your fee or the buyer's, depending on how the program is priced.
  3. Proof of fulfillment. The provider doesn't pay until it gets tracking or proof of delivery, either uploaded by you or synced from your shipping system. Ask whether it pays per shipment or waits until the whole order ships. That matters to a wholesaler sending a backordered item later, or to a supplier delivering to a job site in stages.
  4. Payout. Don't assume you'll get the full invoice amount up front. Resolve, for example, describes risk-based advance rates, typically 50%, 75% or 90%, set by the buyer's creditworthiness, with a full advance available at a higher fee. Ask when the rest arrives and whether it's still covered if the buyer defaults.
  5. Collections. Reminders and past-due notices come from the provider. Some programs send them under the provider's own brand. Others offer a white-label portal that carries your branding. Ask which kind you're getting, because your buyer will judge you by those emails either way.

What B2B BNPL Costs and What Non-Recourse Leaves With You

The fee is the provider's own price. No card network sets it, and there's no public rate table for net terms financing like the interchange tables Visa and Mastercard publish. Treat every number in a sales deck as a quote you need to confirm in writing. For one published example, Resolve lists a flat 3.15% for 30-day terms with a 90% advance, and its comparison page puts 30-day terms with a full advance at up to 3.5%. Longer terms and riskier buyers cost more. Ask each provider to list the fee for each term length separately instead of giving you one blended rate.

Then look beyond that fee. Some programs charge the buyer for extended terms or late payment, and your customer will call you about those charges, not the provider. A monthly platform fee for the software is another cost to ask about. You also need a clear answer on returns. If a buyer sends back part of an invoice the provider already paid, does the credit come out of your next payout or arrive as a separate bill? And do you get back the fee you paid on the returned part?

Non-recourse covers less than the name suggests. Even providers that advertise "100% non-recourse" add conditions. Resolve's own comparison page says its protection applies to eligible approved invoices "per program terms and exclusions." These programs cover credit risk: an approved buyer goes out of business or simply can't pay. Look for exclusions covering commercial disputes (damaged, late or wrong goods), fraud, and orders shipped without the required proof of delivery. If a buyer holds back payment because of a problem with the goods, check whether the contract lets the provider take the payout back from you, and plan as if it does.

Two limits shift risk back to you even under a clean contract. Every buyer's line has a ceiling, so your largest customer may get a line smaller than the orders it places. A provider can also cut or cancel a line when a buyer's credit gets weaker. Then you have to decide whether to extend the difference yourself or ask for payment up front.

B2B BNPL vs. Invoice Factoring vs. In-House Net Terms

All three let a buyer pay later. The differences are when cash reaches you and who takes the call when an invoice goes unpaid.

B2B BNPLInvoice factoringIn-house net terms
When you get cashAfter fulfillment, minus the fee (full or partial advance)Advance when you sell the invoice; the remainder, minus the fee, after the buyer paysWhen the buyer pays
Who approves the buyerProvider, at or before checkoutFactor, by invoice or by accountYou
Who collectsProvider, sometimes under your brandFactor, in most arrangementsYou
Credit riskProvider, for approved buyers on non-recourse terms, subject to exclusionsYou under recourse factoring; the factor under non-recourseYou
Cost structureFee per invoice, tiered by term and advanceDiscount fee tied to how long the invoice stays openCost of carrying the receivable, plus bad debt and staff time
Best fitRepeat buyers ordering online or by phoneUnpaid invoices you need cash from nowStrong cash position and long-known buyers

The biggest practical difference between BNPL and factoring is timing. BNPL makes the credit decision before you ship, so you know at checkout whether the order is financed. Factoring starts after you've already given the buyer terms. It turns unpaid invoices into cash, but it doesn't decide who should get terms. Our guide to how invoice factoring works and what it costs covers advance rates and reserves.

In-house terms look free because nobody sends you a bill for them. The cost shows up in two places. First, cash sits in unpaid invoices for the length of the term, and you fund that gap with a credit line or with reserves you could use elsewhere. Second, some buyers never pay, and you only write them off after staff have spent hours on credit checks and collection calls. Your accounts receivable aging report shows how long each customer actually takes to pay and what you've written off. Those numbers are a better benchmark than any provider's pitch. If the math says to keep offering terms yourself, see our guide to setting net 30 terms customers actually honor.

Checkout and Invoice Integrations to Ask About

A provider only helps if it fits the way your buyers already order. If you sell through Shopify, WooCommerce or another cart, confirm the provider maintains a plugin for your platform. The plugin also needs to handle B2B features like customer-specific price lists and purchase order fields. A lot of B2B orders still come in by phone or through a sales rep. For those, you need a way to create a financed order from your admin screen or send the buyer an application link. Payouts arrive with fees already taken out, and one deposit may cover dozens of invoices. Look for a payout report that ties each deposit to invoice numbers, plus a sync to QuickBooks or your ERP.

Keep your other payment methods running alongside BNPL. Buyers the provider declines, or whose line is too small for an order, still need a way to pay, and their AP departments will use a corporate card or a bank transfer. Make sure you can accept corporate and purchasing cards and ACH bank payments against the same invoice. MannyPay sets up online payment gateways and virtual terminals for phone and emailed orders, so buyers who pay by card can settle quickly.

Break-Even Math: When Net Terms Pay for Themselves

Terms pay for themselves when the extra gross profit from bigger or more frequent orders is more than the fee.

Illustrative example. These assumptions are hypothetical:

  • A distributor's average order is $4,000.
  • Its gross margin is 30%.
  • Buyers currently pay up front by ACH, at a cost small enough to ignore.
  • The BNPL fee for net 30 with a full advance is 3.5%, the top of Resolve's published range.

Today each order earns $1,200 in gross profit. With BNPL, the fee comes out of margin and leaves 26.5%. To keep earning $1,200, the order has to reach $1,200 ÷ 0.265 = $4,528, about 13% bigger than today. If terms raise the average order to $5,000, gross profit becomes $1,325, or $125 more per order. If orders stay at $4,000, you lose $140 on each one.

Three changes to the assumptions move the answer a lot. Each uses the same illustrative distributor:

  • Buyers who paid by card. If the buyer used to pay by card, compare BNPL against the card fee you'll no longer pay. With an assumed 2.5% card cost, today's profit is $1,100 per order, and BNPL costs one extra percentage point, not 3.5. Break-even drops to $1,100 ÷ 0.265 = $4,151, about 4% growth.
  • Thin margins. At a 15% margin with the same 3.5% fee, today's profit is $600 and break-even is $600 ÷ 0.115 = $5,217, about 30% growth. That's a much harder target.
  • Partial advance. Taking a 90% advance at 3.15% instead of 100% at 3.5% saves $14 on a $4,000 order, but $400 waits until the buyer pays. That trade only makes sense if the remaining $400 is still protected and your cash flow can handle the wait.

Where Order Growth Is Realistic

Your industry decides whether that growth shows up.

Wholesale and distribution. Retailers buying inventory want to sell it before they pay for it. Net terms give them room for a bigger opening order or a deeper seasonal stock-up, which is exactly the growth the break-even math needs.

Construction suppliers. Buyers in construction and contracting pay for materials before their own draw or progress payment comes in. Terms that cover that gap put you in line for the materials order on a whole job. With staged deliveries, the per-shipment payout question from step 3 is what decides it.

Furniture trade programs. Interior designers and hospitality buyers who shop at furniture stores buy for client projects with long lead times. Terms that match the designer's own client billing make it easier to place the full order at once instead of in pieces.

Professional services. This is the weakest fit. The work is delivered over time, and disputes are usually about quality, which is exactly what non-recourse exclusions leave out. For professional services firms, billing by milestone and accepting card and ACH payments is simpler.

Start with your own numbers. Pull the average order value and gross margin for the customers who ask for terms. Then ask each provider for three things in writing: the fee for every term length and advance rate, the dispute and fraud exclusions, and how returns are deducted. Run the break-even calculation above with those figures. If the growth you'd need looks realistic for your buyers, test it with a small group before offering terms to everyone. Before the test starts, request a free quote from MannyPay so you can take card payments through an online gateway or virtual terminal from buyers the provider turns down.

Sources

  1. Truth in Lending (Regulation Z), 12 CFR 1026.3 Exempt Transactions
  2. American Bar Association, State Survey of the Standard Commercial Financing Disclosure Laws
  3. Venable, State Commercial Financing Disclosure Laws: Recent Developments and Compliance Considerations (March 2026)
  4. Winston & Strawn, Florida Enacts Commercial Financing Disclosure Law
  5. Alston & Bird, States Impose Commercial Financing Disclosure Requirements
  6. American Banker, Inside Silicon Valley Bank's Bet on Buy Now/Pay Later for Businesses
  7. Resolve, ResolvePay vs TreviPay (published pricing)
  8. Resolve, Resolve Is the Modern Alternative to Factoring Financing (3.15% net 30 fee with 90% advance)
  9. Resolve, SellersFi Alternatives (risk-based advance rates)
  10. Resolve, In-House Credit vs. Resolve (non-recourse exclusions)
  11. Resolve, Net 30/60/90 Terms Guide for B2B Marketplaces (white-label portal)

About the author

Adrian Reyes

Adrian Reyes is Senior Payments & Fintech Editor for Beyond the Swipe, covering credit card processing, merchant accounts, payment technology and processing fees.

This article is for general educational purposes and is not legal, tax or financial advice. Card network rules and state laws change; confirm current requirements for your business.

Related reading