Level 2 and Level 3 Processing: Lower B2B Card Costs Explained
Level 3 credit card processing can lower interchange on corporate and purchasing cards. See which sales qualify and when the extra data pays off.

Photo: Pixabay
On this page 6 sections
- What Level 2 and Level 3 Data Add to a Card Sale
- Why Business and Purchasing Cards Cost More to Accept
- Which Sales Qualify for Commercial Card Interchange Discounts
- The Level 3 Data Fields You'll Need to Send
- Virtual Terminals and Gateways That Support Level 3 Data
- When Level 3 Credit Card Processing Pays for Itself
Key takeaways
- Extra transaction data lowers interchange only on commercial cards. On consumer cards it changes nothing.
- The card network sets the lower rate, but your processor's pricing model decides whether you keep the savings.
- Automation decides the math more than volume does. Line items pulled from invoices cost almost nothing to send, while hand-keyed lines can eat the discount.
- Never fill fields with placeholder data. If you can't send real line items, send real Level 2 data and accept that rate.
Level 3 credit card processing means sending line-item invoice detail with a payment made on a corporate or purchasing card. Visa and Mastercard price many commercial card sales that carry this data below the same sales sent with only basic information. Level 2 is the lighter version. It adds the sales tax amount and a customer or purchase order number. You save only if two things hold. Your customers have to pay with commercial cards, and your processor has to pass interchange savings through to you.
The sellers who gain the most bill organizations. Picture a distributor taking purchasing card orders by phone from municipal buyers, or a contractor invoicing a school district's facilities office. A shop that mostly sees consumer cards gains nothing from the extra data. The rules also move over time. Visa in particular has changed how it treats enhanced commercial data, so read our companion piece on which B2B sellers still save with Level 2 and Level 3 data. Then confirm current terms with your processor before you build a workflow around an old rate table.
What Level 2 and Level 3 Data Add to a Card Sale
"Level" describes how much information travels with a transaction. It isn't a grade of card or a type of merchant account.
Level 1 is the basic record every sale carries. It tells the card issuer who charged the card and how much. At Level 1, a tapped coffee and a large equipment order look identical to the buyer's accounting team.
Level 2 adds a short set of fields that help the buyer's company reconcile the charge. The two that matter most are the sales tax amount and a customer code or purchase order number. Many processors also ask for your tax ID and the ship-to ZIP code. Together, these fields are often enough for a corporate accounting system to match a card charge to a PO.
Level 3 adds the invoice itself, broken into line items. Each line describes one item along with its quantity and price. Freight and discounts travel at the order level. Instead of a single total, the buyer's accounts payable team sees an itemized invoice.
The buyer is the reason this system exists. Large organizations give purchasing cards to staff so they can buy supplies without cutting a purchase order for every box of fasteners. Finance teams still need to know what was bought and which budget it hits. Card issuers sell that reporting to their corporate clients, and the networks encourage merchants to supply the data by pricing enhanced-data transactions lower.
Why Business and Purchasing Cards Cost More to Accept
Commercial cards sit in the higher-cost categories of Visa's and Mastercard's interchange schedules. Interchange is the per-sale fee paid to the bank that issued the card. The networks set it; your processor doesn't. Issuers use that money to fund rewards and longer billing cycles, plus the spending controls their corporate clients pay for.
The main commercial card types:
- Business cards go to small companies and are often used by the owner. They behave much like consumer rewards cards.
- Corporate cards go to employees of larger companies, mostly for travel and expenses.
- Purchasing cards (p-cards) let procurement staff at companies and public agencies buy goods and services directly.
- Fleet cards are restricted to fuel and vehicle maintenance.
How you take the card adds to the cost. Most B2B card payments are keyed into a virtual terminal or entered on a payment page. That puts them in card-not-present categories, which are priced above a card tapped in person. Our guide to keyed transaction fees explains that gap. A keyed purchasing card sale sent with only basic data can land in a standard commercial category that costs noticeably more than the same card with complete data. For the wider picture, see our piece on business credit card processing for corporate and B2B cards.
Which Sales Qualify for Commercial Card Interchange Discounts
Two conditions have to line up before extra data earns a lower rate.
The card has to be a commercial card that the network rewards at the level you send. Line items attached to a consumer Visa card earn nothing. Gateways identify the card type from its BIN, the bank identification number at the start of the card number. Many gateways can prompt for enhanced fields only when the card is commercial. Purchasing cards and some corporate cards have usually been the main targets of Level 3 pricing, but eligibility differs by network and has shifted. Ask your processor which card products qualify at each level. American Express and Discover handle enhanced data under their own pricing, so raise them as a separate question.
The data has to be complete and settled on time. Your processor can tell you which fields the networks treat as mandatory and how soon you must settle after authorization. A sale commonly drops to the standard commercial rate for one of these reasons:
- The tax field is blank on a taxable sale.
- The PO or customer code is missing.
- The settled amount doesn't match the authorized amount.
- The batch settles late.
If the buyer is tax-exempt, as a public school district usually is, flag the sale as tax-exempt instead of leaving the tax field empty. Systems treat those two cases differently.
Don't pad fields with placeholder values. A generic line typed just to satisfy a form misrepresents the transaction and may not qualify for enhanced-data rates. It also clutters your customer's statement with information their finance team can't use. Ask your processor how it validates these fields. When you can't produce real line items for a sale, send real Level 2 data and accept that rate.
Your Pricing Model Decides Whether You See the Savings
The lower interchange rate is a network rule. What you pay is your processor's pricing, and the two are separate.
On interchange-plus pricing, the processor charges actual interchange plus a disclosed markup, so a lower Level 3 rate shows up directly on your statement. On flat-rate or tiered pricing, the processor may keep the difference. You would be doing the extra work while someone else keeps the benefit. Some processors also charge a per-transaction or monthly fee for enhanced data. Ask about both before you enable anything.
The Level 3 Data Fields You'll Need to Send
Your processor's specification sets the exact field names and which ones are mandatory. This table covers what most setups ask for.
| Field | Level | Where it usually comes from |
|---|---|---|
| Sales tax amount or tax-exempt flag | 2 and 3 | Invoice or POS tax calculation |
| Customer code or PO number | 2 and 3 | Buyer's purchase order |
| Merchant tax ID | 2 and 3 | Entered once in gateway settings |
| Ship-to and ship-from ZIP | 3, sometimes 2 | Order or job address |
| Freight and discount amounts | 3 | Invoice totals |
| Item description and product code | 3 | Catalog or SKU list |
| Commodity code | 3 | Standard classification code mapped to each item |
| Quantity and unit of measure | 3 | Invoice line (for example, case or hour) |
| Unit price and line total | 3 | Invoice line |
| Line-item tax | 3 | Invoice line |
The effort depends on what you sell.
Wholesale and distribution. SKUs already live in your inventory system, so mapping commodity codes is a one-time job per product category. Partial shipments need care. If you authorize a full order and ship it in pieces, each settlement should carry only the lines that actually shipped.
Services and contracting. An IT support firm can send a line such as "network support," with "hour" as the unit of measure and the hours billed as the quantity. A monthly retainer can be a single line with a quantity of one. Sales tax on services varies by state, so the tax field must match what you actually charged. Confirm your obligations with a tax adviser. MannyPay also covers payment processing for professional services firms.
Contractors usually split a commercial job into materials and labor, and those belong on separate lines. Facilities managers at property management companies often pay smaller jobs with p-cards, and school districts do too. The PO number they give when approving the job tends to go missing by the time the invoice gets paid, so record it on the work order. See our page on payment processing for construction and contracting.
Virtual Terminals and Gateways That Support Level 3 Data
The data has to survive every step, from the screen where you enter the sale through the gateway to the processor's platform. A basic countertop terminal typically sends basic data and little more. B2B sellers usually choose between typing the data and having software send it.
Keying Line Items in a Virtual Terminal
This approach fits occasional large p-card orders taken by phone or email. A virtual terminal with enhanced-data screens lets staff enter the PO number and tax amount alongside each line item. Typing is the weak point. A long order keyed by hand is slow and invites mistakes. For the security side of phone orders, see how to accept credit card payments over the phone.
Passing Line Items Automatically From Invoices or a Storefront
Contractors and service firms that bill on invoices already have the line items written down. When the customer pays an invoice by card, the gateway can send those lines with the payment. Ask whether your accounting connection, such as a QuickBooks integration, passes line items or only the invoice total.
Higher-volume sellers usually connect a payment gateway to their e-commerce platform or ERP. The gateway then sends cart line items with every order, with no manual entry.
Ask what your gateway sends when a field is empty. Some gateways fill missing Level 3 fields with default values. Find out whether that data would qualify under current network requirements and whether it reflects what you sold.
Questions to put to any provider:
- Which card networks do you support Level 2 and Level 3 data for?
- Does the virtual terminal show enhanced fields only when the card is commercial?
- Can line items flow automatically from my invoicing or e-commerce platform?
- Am I on interchange-plus, and will the savings appear on my statement?
- Is there an enhanced-data fee, from you or from the network?
MannyPay offers virtual terminals and payment gateways, including Authorize.net and NMI, with integrations for QuickBooks and the major e-commerce platforms. Ask a specialist which setup supports the fields your customers' cards need. If you are still choosing a tool, our guide to comparing virtual terminal providers on fees and features lists what to check.
When Level 3 Credit Card Processing Pays for Itself
Volume matters, but automation matters more. The savings come from one calculation. Take the commercial card volume that currently downgrades and multiply it by the gap between the downgraded rate and the enhanced-data rate. Each full percentage point of gap is worth one cent on every dollar of that volume. Subtract any enhanced-data fee, then subtract the staff time it takes to produce the data.
Staff time is the cost owners forget. A supplier whose invoicing system sends line items automatically pays almost nothing extra per sale, so even a modest rate gap adds up across a large purchasing card book. A small contractor whose office manager types every line by hand can spend more in wages than the discount returns, especially if its customers mostly carry business cards and those earn little or no enhanced-data discount. Both businesses send the same data, yet they reach opposite verdicts.
This table turns that logic into a starting decision. Treat it as a guide to the conversation with your processor, not as a rate quote.
| Your situation | Likely verdict |
|---|---|
| Heavy p-card volume, line items flow from invoices or a cart | Usually worth setting up; ongoing labor is minimal |
| Heavy p-card volume, line items keyed by hand | Worth it on large orders; plan to automate |
| Light commercial volume, mostly business cards | Level 2 may be enough; confirm whether Level 3 earns anything |
| Mostly consumer cards | Enhanced data earns nothing |
For a business in the bottom two rows, a cheaper payment method may matter more than better card data. One option is steering repeat customers to bank transfers, covered in ACH vs. credit card fees on invoices. Another is passing card fees to customers on B2B invoices, where network rules and state law permit it.
To find your row, pull your recent processing statements. Total your commercial card volume and look for downgrade lines, which processors often label with words like "standard" or "non-qualified." Ask your processor for the real rate gap on your card mix, run the calculation above, then subtract fees and staff time. If the result is meaningful, request a free quote and attach those statements. A MannyPay specialist will respond within one business day.
This article is for general educational purposes and is not legal, tax or financial advice. Card network rules and state laws change; confirm current requirements for your business.


