Equipment Financing for Small Business: Loans, Leases, and Costs
Equipment financing for small business: compare loans, $1 buyout leases and FMV leases on total cost, 2025 tax rules, and the contract clauses that raise it.

Photo: Pixabay
On this page 9 sections
- How Equipment Financing for Small Business Is Secured
- Loans, $1 Buyout Leases and FMV Leases Differ on Who Owns the Equipment
- What Lenders Check Before They Approve
- A Worked Example: $30,000 of Kitchen Equipment, Three Offers
- The 2025 Tax Law Raised Write-Offs, and the Timing Trap
- Contract Clauses That Cost More Than the Rate
- Card Terminal Leases: The Trap That Ended up in Court
- When Cash or a Line of Credit Beats Financing
- Compare Offers on the Same Five Numbers
Key takeaways
- A zero-down $1 buyout lease can charge far more for the cash you keep on day one than its headline rate shows. In our example it works out to about 38% a year.
- Turn every lease rate factor into an annual rate, and ask whether payments are due in advance, before you compare it with a loan APR.
- Under the 2025 tax law, the bonus depreciation rate depends on when you acquired the equipment as well as when you placed it in service. Writing off financed equipment in year one also leaves later payments with no deduction to match them.
- Price card terminals as outright purchases before you sign anything non-cancelable. A terminal lease keeps running after you leave the processor.
Equipment financing for small business lets you put a pizza oven, a vehicle lift or a work truck to work now and pay for it over time, with the equipment itself as the collateral. It comes in three forms. An equipment loan makes you the owner from day one. A $1 buyout lease is a loan in everything but name. A fair market value (FMV) lease has a lower payment and leaves you a buy-or-return choice at the end. Pick by the total cash you'll pay over the whole term. The monthly payment leaves out too much to decide on.
How Equipment Financing for Small Business Is Secured
The lender or lessor takes a security interest in the specific asset you're buying. If you stop paying, they repossess it and sell it. Because the deal is secured, equipment financing is usually easier to get than an unsecured loan. It also means the equipment you choose affects the terms you're offered.
Equipment with a deep resale market gets better pricing: a titled food truck, a name-brand alignment rack, a skid steer. A restaurant's hood and fire-suppression system is different. It's bolted into the building and barely has a used market, so expect a higher rate or a bigger down payment. Delivery and installation charges, called soft costs, have no resale value at all. Ask each lender whether it finances soft costs, and how much of them.
The lender records its lien by filing a UCC financing statement with your state. Read the collateral description. A filing that covers only the financed equipment is routine. A filing that claims "all business assets" will turn up whenever you apply for credit for years afterward, so ask for the narrow version before you sign.
Loans, $1 Buyout Leases and FMV Leases Differ on Who Owns the Equipment
With an equipment loan, the title is yours from the start, and each payment covers principal and interest. Expect to put money down. Banks, credit unions and manufacturers' finance arms all make these loans, which is why contractors often arrange financing for a loader right at the dealer counter. For long-lived machinery, the SBA's 7(a) and 504 programs also list equipment as an eligible use. According to Lendio's summary of SBA rules, equipment financed under 504 needs a useful life of at least 10 years.
A $1 buyout lease, also called a capital or finance lease, charges a fixed payment for a set term, and one dollar at the end makes the equipment yours. Economically it's a loan. What changes is how the price is quoted. Lessors give a lease rate factor, which is the monthly payment divided by the equipment cost, instead of an interest rate. You can't compare that with a loan APR until you convert it.
A fair market value lease has the lowest payment because you pay only for the value you use up during the term. At the end, you either buy the equipment at whatever price the lessor calls fair market value or send it back. That fits equipment that goes out of date before it wears out. An auto shop's scan tools are the classic case, because the shop plans to replace them once vehicle coverage moves past them.
Contractors and food truck operators earn most of their revenue in a few months of the year. If that describes you, ask lenders by name for a seasonal or skip-payment schedule. A lighter payment in January can do more for your cash flow than a small rate difference, and a 13-week cash flow forecast shows where the tight months fall.
What Lenders Check Before They Approve
Every lender sets its own criteria. Credit-score and time-in-business minimums vary from lender to lender and move with credit conditions, so get each lender's minimums in writing before anyone pulls your credit. Most lenders weigh the same five things.
- Owner's credit. Owners sign a personal guarantee on nearly every small-business deal, so your personal credit file counts. A thin or damaged file pushes up the rate, the down payment or both.
- Operating history. More lenders compete for your deal as your track record gets longer. Startups still get approved, usually with more cash down or through a vendor's own finance program.
- Bank deposits. Lenders read your bank statements to see whether deposits cover the new payment with room to spare. Steady card settlements help a restaurant or repair shop make that case.
- Daily-debit obligations. A merchant cash advance and its daily remittances draw on the same deposits the new payment depends on, and that makes lenders cautious.
- The asset and the seller. New equipment from an established dealer, with a clean invoice, is the easiest deal to approve.
A Worked Example: $30,000 of Kitchen Equipment, Three Offers
These numbers are illustrative. They are not quotes from any lender. A restaurant needs $30,000 of kitchen equipment and has three 60-month offers:
- Offer A, loan: 10% down ($3,000), $27,000 financed at 9% APR, a $400 origination fee. Payment: $560.48 a month.
- Offer B, $1 buyout lease: no money down, $675 a month paid in arrears, a $350 documentation fee.
- Offer C, FMV lease: no money down, $590 a month, a $350 documentation fee. The owner guesses the end-of-term buyout at $4,500. The lessor sets the real price.
| Offer | Due at Signing | Monthly | Total Cash Out | You Own It? |
|---|---|---|---|---|
| A: Loan | $3,400 | $560.48 | $37,029 | Yes |
| B: $1 buyout lease | $350 | $675 | $40,851 | Yes |
| C: FMV lease, then buy | $350 | $590 | $40,250 | Yes |
| C: FMV lease, then return | $350 | $590 | $35,750 | No |
Here's the arithmetic. Offer A is the $3,400 due at signing plus 60 payments of $560.48 ($33,629). About $6,629 of that is interest. Offer B is 60 payments of $675 ($40,500) plus the fee and the dollar. Offer C is 60 payments of $590 ($35,400) plus the fee, with the $4,500 buyout added if you keep the equipment.
Convert the Lease Rate Factor Before You Compare
Offer B's lease rate factor is 0.0225 ($675 ÷ $30,000). Over 60 payments in arrears, that works out to an annual rate of about 12.5%. If payments are due in advance, the same factor comes to about 13.0%. Counting the $350 documentation fee as a cost of the lease also brings it to about 13.0%. Next to the loan's 9%, the "low monthly payment" lease costs more per dollar borrowed.
What the Zero-Down Lease Really Charges You to Keep Your Cash
Most comparisons skip this. Offer B's real selling point is that you keep $3,050 on day one ($3,400 due at signing on the loan minus $350 on the lease). In exchange, you pay $114.52 more every month for 60 months, or $6,871 in total. That amounts to borrowing $3,050 at roughly 38% a year. If the restaurant can cover the down payment and still hold its cash reserve target, the loan is clearly the better deal. If the down payment would leave payroll short, the lease buys liquidity, but at a high price. Know that before you pay it.
The FMV lease is the cheapest path only if you send the equipment back. A restaurant planning to run its ovens for ten years would pay about $3,200 more on the FMV route than on the loan, and its roughly $600 edge over Offer B depends on a buyout price the lessor controls. Put your own quotes into the same table and the decision usually becomes clear.
The 2025 Tax Law Raised Write-Offs, and the Timing Trap
The One Big Beautiful Bill Act, signed July 4, 2025, raised the Section 179 expensing limit to $2.5 million, with a phase-out starting at $4 million, for property placed in service after December 31, 2024, according to BDO's analysis. Both figures are indexed for inflation, and Section179.org lists a $2,560,000 limit for 2026. The Section 179 deduction also can't exceed your business's taxable income, as Warren Averett's summary notes.
Bonus depreciation is a separate deduction with its own timing rule. Per IRS Topic No. 704, it's 100% for qualified property acquired and placed in service after January 19, 2025. Property acquired before January 20, 2025 and placed in service during 2025 gets 40%. The acquisition date counts as much as the delivery date. Equipment you ordered or contracted for before January 20, 2025 can fall under the 40% rate even if it arrived and went into service later in the year. Before you count on 100%, confirm the acquisition date and the date of any binding purchase contract with your CPA.
Few small businesses come anywhere near those limits. The bigger risk is timing. Financing the equipment doesn't change the fact that you bought it. A loan-funded purchase is a purchase, and a $1 buyout lease is generally treated as one too. Go back to Offer A. If the restaurant writes off the full $30,000 in year one, it has paid only about $10,126 that year (the $3,400 at signing plus 12 payments). In years two through five it pays about $6,726 a year, and none of the principal is deductible because the equipment has already been fully expensed. Only the interest portion generally stays deductible. Taxable income goes up while the cash keeps going out.
An FMV lease is generally treated as a rental, so you deduct the payments as you make them and don't depreciate the equipment. This is general information, not tax advice. Your CPA decides how your contract is classified and how much to expense in year one.
Contract Clauses That Cost More Than the Rate
Most of the gap between a cheap-looking deal and an expensive one sits in the fine print.
- Non-cancelable ("hell or high water") terms. You owe every payment even if the equipment breaks or the location closes. Your warranty claim is against the vendor, and the lessor keeps collecting.
- Auto-renewal on FMV leases. Many require written notice within a set window before the end date. Miss it and the lease renews, sometimes for a full year. Put the notice date on your calendar the day you sign.
- Forced insurance. Without proof of coverage, the lessor adds its own insurance or "loss damage waiver" to your bill. Adding the equipment to your business policy typically costs less.
- Prepayment. Ending a lease early usually means paying all the remaining payments, not just the remaining principal. Check loans for prepayment penalties too.
- Pass-through charges. Look for interim rent billed between delivery and the first payment, personal property tax billed back with an admin fee, and freight and de-installation charges when FMV equipment goes back.
Card Terminal Leases: The Trap That Ended up in Court
Long, non-cancelable leases on card terminals have a documented history. In April 2016, the New York Attorney General sued Northern Leasing Systems and its affiliates. The court found that Northern Leasing had committed "persistent fraud" against small businesses such as salons, auto repair shops and restaurants. According to Payment Review's account of the case, the state vacated 29,617 default judgments. In 2024 the Attorney General announced more than $4.6 million recovered for affected businesses.
These leases stay in force after you switch processors. As an illustration, 48 payments of $45 come to $2,160. Compare that with the purchase price of the same model before you sign. If you're already locked into a contract, our guide to avoiding merchant account early termination fees covers your options. For new hardware, price smart terminals and full POS systems as outright purchases first. If you sell at events or job sites, see our comparison of cellular vs. Wi-Fi credit card machines to learn which one stays online.
When Cash or a Line of Credit Beats Financing
Financing makes sense when the equipment earns revenue right away and keeps working after the last payment. On a purchase of a few thousand dollars, a fixed documentation fee is a big share of the total cost, so paying cash usually wins. Cash also wins when the equipment won't outlast the term.
A line of credit fits purchases you'll pay off within a few months, such as a replacement fryer before the summer rush, and you can draw on it again for the next breakdown. Our comparison of a business line of credit vs. a term loan walks through that choice. Don't pay for long-lived equipment with daily-repayment money. Using a merchant cash advance for a truck build-out squeezes the cost of a multi-year asset into a few months of expensive repayment.
Compare Offers on the Same Five Numbers
Get at least three written quotes for the same equipment, at the same price and the same term. For each one:
- Get the APR on a loan, or the lease rate factor on a lease plus whether payments are due in advance or in arrears.
- Write down every dollar due at signing.
- Add up total cash out over the term, including the buyout, and get in writing how fair market value will be set.
- Get the UCC filing scope, the renewal notice window, the insurance requirement and the prepayment terms in writing.
- Have your CPA confirm the tax treatment, the acquisition date for bonus depreciation and the year-one deduction.
Match the term to how long the equipment will actually earn money. A restaurant's kitchen line earns for years. A food truck build-out carries the whole business. An auto repair shop's diagnostic gear ages fast, and a contractor's heavy equipment holds its resale value. If the deal includes card terminals, request a free quote before you sign a non-cancelable lease so you can compare buying outright with the lease you've been offered. A MannyPay specialist responds within one business day.
Sources
- IRS Topic No. 704, Depreciation
- BDO: One Big Beautiful Bill Act Expands 100% Depreciation Expensing Opportunities
- Warren Averett: The One Big Beautiful Bill Breakdown: Section 179
- Section179.org: Section 179 Legislative History
- Lendio: How to Use SBA Loans for Equipment
- Long Island Business News: Attorney General James Secures Over $4.6 Million for Small Businesses From Northern Leasing Affiliates
- Payment Review: Credit Card Terminal Leases: Why Cancelling Does Not End Them
This article is for general educational purposes and is not legal, tax or financial advice. Card network rules and state laws change; confirm current requirements for your business.


