Credit Card Machine Not Working? What to Check, in Order
Credit card machine not working? Check power, connection, chip reader and batch in the right order, read declines correctly and keep selling meanwhile.

Photo: Pixabay
On this page 7 sections
- Credit Card Machine Not Working? Start With Power and a Real Restart
- Card Reader Not Connecting: Wi-Fi, Ethernet, Cellular and Bluetooth
- Chip Reader Not Working? Clean It, Then Test Tap
- Terminal Errors and Declines Need Different Fixes
- Stuck Transactions and Failed Batches
- Keep Selling While the Terminal Is Down
- When to Call Support or Replace the Device
Key takeaways
- A decline is the issuer's answer, not a fault. Visa's rules don't allow retries on "never approve" codes such as pick up, lost or stolen card.
- After a frozen sale, check the transaction report before you run the card again. A pending charge in the customer's app doesn't prove the sale approved.
- In our illustrative example, keying a $2,700 rush cost about $10.53 more in Visa interchange than chip or tap. The bigger cost of keyed sales is fraud risk.
- Tamper and encryption alerts lock the terminal on purpose. Only your provider can clear them.
When your credit card machine is not working, check the causes in a fixed order: power, then the connection, then the card reader, then software and the batch. A full restart or a repaired network connection clears most counter outages, and you can test both yourself before you call anyone. If the screen says "declined," the machine is fine. The card's issuing bank said no, and rebooting won't change its answer.
Match what you see on the screen to a starting point:
| What you see | Most likely cause | Try first |
|---|---|---|
| Black screen, won't power on | Power supply or dead battery | Try another outlet and reseat the cable |
| "Host unavailable" or "Comm error" | Network | Confirm other devices are online |
| "Chip read error" or a prompt to swipe | Dirty reader or damaged chip | Clean the reader, try another card |
| "Declined" or "Do not honor" | Card or issuing bank | Ask for another payment method |
| Frozen mid-sale | Software or stuck transaction | Check the report before re-running |
| Batch failed | Connection or open transaction | Fix the connection, then call support |
Credit Card Machine Not Working? Start With Power and a Real Restart
Tapping a frozen screen rarely helps, so do a full power cycle. If the menu still responds, shut the device down from it. If it doesn't, unplug the terminal, wait until the screen and every light go dark, and plug it back in. A handheld or mobile terminal that ran completely flat may need time on the charger before it will boot.
Then check the boring causes, because they take down plenty of counters. Make sure the power brick is seated at both ends and the power strip hasn't tripped. Staff sometimes borrow a terminal's outlet to charge a phone. On countertop units, the cable between the power supply and the terminal can work loose when the device gets pushed around.
Integrated setups need restarting in sequence: network equipment first, then the POS station once the internet is back, then the PIN pad last, so each device finds the one it depends on. In grocery and retail lanes where the PIN pad is cabled to a register, check that cable too. If the register shows the sale but the PIN pad never wakes, that link is the usual suspect. Our explainer on what a PIN pad is and how it connects covers the common setups.
Card Reader Not Connecting: Wi-Fi, Ethernet, Cellular and Bluetooth
First decide whether the problem is your network or only the terminal. If a phone or laptop on the same network loads a web page, the internet is up and the terminal's connection is at fault. If every terminal fails at once while the internet works, the trouble may be upstream at the processor, so ask your provider whether there's an outage.
Wi-Fi. Most failures follow a change, such as a replaced router or a new password. Avoid guest networks with a sign-in page, because a terminal can't click "accept." Some terminals join only one band of a dual-band router. If your router shows two network names, check the device's specifications and pick the matching one. Restaurants with handhelds should walk the patio and back corners with the device. A tableside unit that works at the host stand and fails at the far tables needs better Wi-Fi coverage, and a new terminal won't fix that.
Ethernet. Look for lights on the port. No light usually means a bad cable or a dead port on the switch. Swap in a cable you know works, and in older buildings make sure the line runs to the switch and not to a phone jack.
Cellular. Check the signal bars, reseat the SIM if your model allows it, and ask your provider whether the device's data plan is still active. A terminal that works in the parking lot but not at the back counter has a signal problem, and the radio is probably fine.
Bluetooth. Phone-paired readers often drop after an app or phone update. Close and reopen the payment app and confirm it still has the Bluetooth and location permissions it asks for. If that fails, unpair the reader and pair it again. Devices that sit on a charging base, such as the Clover Flex, sometimes recover after being reseated.
Chip Reader Not Working? Clean It, Then Test Tap
If one card fails and the next works, the first card is the problem. Worn and scratched chips are common. If every chip card fails, look at the reader. Clean the slot with a cleaning card made for payment terminals and follow the manufacturer's guidance rather than using liquids. At busy counters, the most common cause of a chip read error is a customer pulling the card out before the screen says to.
When the chip won't read, many terminals prompt for a swipe. That fallback keeps the line moving, but it gives up the chip's protection for that sale. The card networks' counterfeit fraud liability shift took effect for in-store terminals in October 2015. Since then, the party using the less secure technology generally bears the loss on counterfeit card fraud, according to EMV Connection, an industry site that explains chip card rules. A magnetic stripe is easy to copy, and the chip isn't. If fallback swipes become routine on one device, the reader needs service. Our explainer on the EMV liability shift and counterfeit card fraud walks through who pays in each case.
For tap failures, have the customer hold the card or phone flat over the contactless symbol for a moment. Phone wallets usually need the phone unlocked. If no tap works at all, check whether contactless was switched off in the terminal settings. Our guide to contactless payments and NFC setup covers the settings that matter.
Terminal Errors and Declines Need Different Fixes
Under pressure, staff treat every message the same way. A terminal error ("host unavailable," "timeout") means the transaction never got a clean answer, so go back to the connection checks. A decline means the request reached the card issuer and came back no. Nothing on your end will change it.
- Insufficient funds: ask for another card, or split the total with another payment method.
- Do not honor: the issuer refused without a reason. Only the cardholder's bank can explain, so the customer should call the number on the back of the card.
- Expired card or invalid PIN: check the date on the card, or let the customer re-enter the PIN once.
- Call issuer or referral: don't accept an authorization code the customer reads off their phone. If you pursue a voice authorization, get it through your processor's authorization line.
- Pick up card: don't confront the customer. Follow your store policy and put staff safety first.
Running the same declined card again and again wastes time, and the card networks track it. Visa's rules put some decline codes in a "never approve" category, and those may not be retried at all. They include 04 (pick up card), 41 (lost card) and 43 (stolen card), according to a summary of the rules published by the processor PayKings. The same summary says Mastercard assesses an excessive authorization attempts fee on U.S. transactions once a card has been declined 10 times at the same merchant within 24 hours.
Chargebacks911 puts that fee at $0.50 per declined authorization. Mastercard runs the program through the acquiring side, and Paya's support notes on it tell acquirers to stop sending authorizations on the same card at the same merchant after 10 declines in 24 hours. The threshold and the fee are network rules. Whether your processor passes the fee through to you, and at what markup, is its own pricing, so ask. Our explainer on card brand fees, assessments and network fees shows where those charges appear on a statement.
Wording and numeric codes vary by terminal model and processor. When an error repeats, write down the exact code and message. Support can solve a specific code far faster than "it said error."
Stuck Transactions and Failed Batches
Before you run a card again after a sale freezes, check the terminal's transaction report or your POS to see whether it approved. A pending charge in the customer's banking app doesn't prove the sale completed, and re-running it can charge the customer twice. If you find a duplicate the same day, voiding it before the batch closes is cleaner than refunding it later.
The batch is the day's group of approved sales that the terminal sends for settlement and funding. When it fails to close, those sales haven't settled, and your deposit waits. Don't delete the batch or clear the terminal's memory to start fresh. Fix the connection, then call support so they can confirm which transactions settled.
Many terminals download updates and settle overnight, so leave them plugged in and connected after closing. An update interrupted by a dead battery or an unplugged router can leave a device stuck on a loading screen until support pushes it again. Older terminals eventually stop receiving updates. At that point, replacement is the fix.
Keep Selling While the Terminal Is Down
Pick your backup before you need it. The usual options, in rough order of preference:
- A second device. A charged spare countertop unit, or one of the mobile terminals that run on a phone or cellular connection, keeps card-present pricing and chip protection.
- A virtual terminal. With virtual terminals for keyed payments, you type card details into a browser. Keyed sales cost more and carry more fraud risk.
- Offline mode, if your terminal supports it and you've switched it on. The terminal stores sales and sends them when the connection returns. Those sales aren't authorized at the counter, so any that decline later are your loss. Set conservative limits and confirm the setup with your provider in advance.
- Cash. Post a sign at the door so customers know before they shop, and do a proper end-of-shift cash drawer count when cash volume jumps.
Don't write full card numbers on paper to run later. That creates sensitive records you then have to lock up and eventually destroy securely.
What a Keyed Backup Actually Costs: A Worked Example
Many owners skip the virtual terminal because "keyed costs more." Run the numbers before you decide. These are illustrative assumptions, not a benchmark. A gift shop's Saturday rush brings 60 card sales over three hours at an average of $45. That's $2,700, or about $900 an hour. Every card is a Visa traditional consumer credit card. The shop pays interchange-plus, so interchange passes through at cost.
Helcim's published summary of Visa's U.S. interchange lists CPS/Retail at 1.51% + $0.10 for chip, tap or swipe and keyed CPS/Retail at 1.90% + $0.10. Confirm current figures against Visa's own rate table.
| Chip or tap | Keyed | |
|---|---|---|
| Percentage portion ($2,700 × rate) | $40.77 | $51.30 |
| Per-item portion (60 × $0.10) | $6.00 | $6.00 |
| Interchange for the rush | $46.77 | $57.30 |
Keying the whole rush costs about $10.53 more in interchange. Turning those customers away puts $2,700 in sales at risk. On cost alone, a virtual terminal is a sensible stopgap. The bigger exposure is fraud: a keyed sale has no chip protection, so a stolen-card chargeback is more likely to land on you.
Two caveats can change the math. Flat-rate and tiered plans often charge the processor's own keyed rate, which can be far above interchange. And depending on how a virtual terminal is set up and what data you enter, a keyed sale may fall into a pricier card-not-present category. Before an outage forces the question, check how keyed sales are billed on your processing statement, line by line.
For a wider look at running a store when systems fail, see our piece on keeping sales going when systems go dark.
When to Call Support or Replace the Device
Call support right away in three cases: a failed batch, any tamper or security message (including ones that mention keys or encryption), and connection errors that continue after you've confirmed the network works. Tamper alerts lock the device on purpose, and only the provider can clear or replace it. Before you dial, have ready your merchant ID, terminal ID, serial number, the exact error and the steps you already tried.
Replace the device when it no longer gets updates, keeps failing the same way, or can't take the tap and phone-wallet payments your customers expect. Our comparison of smart payment terminals vs. traditional card machines covers what changes when you upgrade. MannyPay sells smart terminals from Clover, Valor, Dejavoo and PAX, and a specialist responds to free quote requests within one business day.
Today, tape a card next to each terminal with the support number, merchant ID, terminal ID and serial number. Then run one test sale on your backup method before the next busy shift.
Sources
This article is for general educational purposes and is not legal, tax or financial advice. Card network rules and state laws change; confirm current requirements for your business.


