Partial Authorization: Turn Low-Balance Declines Into Sales
Payment Processing Fundamentals

Partial Authorization: Approving Prepaid and Debit Cards With Low Balances

Partial authorization approves a card for its remaining balance so you can collect the rest another way. See the network rules and how to test your POS.

Pizza vendor in a straw hat working beside a fired oven under a handwritten chalkboard pizza menu

Photo: Pixabay

On this page 7 sections
  1. How a Partial Authorization Request Works
  2. One Short Card, Four Outcomes
  3. Which Cards Come Back Partially Approved
  4. Network Rules on Supporting Partial Authorization
  5. Handling Partial Approvals by Business Type
  6. Reverse the Approval When the Sale Doesn't Happen
  7. Test Your Partial Authorization Setup This Week

A partial authorization is an approval for less than the amount you asked for. If a customer's prepaid, gift or debit card holds less than the sale total, the issuer can approve the remaining balance instead of declining the sale, and your POS collects the difference with cash or another card. That only happens when your terminal or gateway says in the authorization request that it can accept a partial approval. For some types of business, Visa and Mastercard rules require it.

How a Partial Authorization Request Works

Your system has to ask for a partial approval. On Visa, a merchant whose devices are certified for it sets Field 60.10, the Partial Authorization Indicator, to "1" in every authorization request. When the card can't cover the full amount, the issuer returns a special response code and approves the available balance. Visa lists that response as code 10, "partial approval". Your POS then subtracts the approved amount from the total and asks for another form of payment. Visa calls this split-tender functionality, and its guide says merchants must turn it on to support partial authorization.

If the indicator is missing, the issuer has two choices: approve the full amount or decline. Partial approvals never arrive unrequested.

This isn't new. Visa introduced its Partial Authorization Service in 2005, and the same Visa document says all Visa prepaid issuers and all acquirers must support it. The acquirer is the bank behind your merchant account. Online, the flag is part of the gateway request. Heartland's Portico gateway, for example, only allows a partial authorization if the request includes an AllowPartialAuth value set to "Y". Other gateways name the field differently, but they all need it.

One Short Card, Four Outcomes

The numbers below are illustrative. Assume a grocery order totals $62.40 and the customer taps a Visa prepaid card with $45.00 left on it. She also has a debit card she can use for any remainder.

Your setupWhat the issuer doesWhat you end up with
Indicator sent, POS handles split tenderApproves $45.00 with code 10Screen shows $17.40 due, she pays it with debit, and you collect the full $62.40
Indicator not sentDeclines for insufficient funds$0 on that card. The sale depends on her finding another way to pay, and her $45.00 stays unused
Indicator sent, POS ignores the partial amountApproves $45.00 with code 10Register logs $62.40 as paid, deposit shows $45.00, and you're $17.40 short
Indicator sent, customer walks away, no reversalApproves $45.00 with code 10A $45.00 hold sits on her card for a sale that never happened

The card balance is the same in all four rows. What changes the result is your configuration and your staff's habits.

The second row is the quiet loss. Insufficient-funds declines look normal on reports, so few merchants notice the sales they lost. The third row costs more and usually shows up when the terminal and POS software come from different vendors and connect through an integration. One side sends the indicator and the other was never built to read a partial amount. Nobody sees the gap until reconciliation.

Which Cards Come Back Partially Approved

Many merchants think partial approvals only happen on gift cards. Debit cards produce them too. Mastercard's Transaction Processing Rules have required issuers since April 1, 2023, to support partial approval on all prepaid Mastercard cards, all Debit Mastercard cards and all Maestro accounts. On the Visa side, Visa says a growing number of debit issuers support the service in addition to prepaid issuers. So a customer's regular checking-account debit card that's close to zero can come back partially approved. Credit cards rarely do, because a credit line is usually large compared with one purchase.

Prepaid cards still produce most partial approvals, because their balance only goes down and the leftover is usually an odd amount the cardholder has lost track of. When "insufficient funds" appears on a prepaid card, the customer is often surprised there was a shortfall at all.

Two kinds of card work differently:

  • Your own store gift cards are closed-loop. Your POS or gift card provider tracks the balance, and Visa and Mastercard never see the transaction. Whether the system uses up the remaining balance and prompts for the rest depends on your gift card program settings, not on network partial authorization.
  • Cash back requests never get a partial approval on Mastercard. The rules say an issuer must not answer a cash withdrawal or a purchase with cash back by approving part of it. If a debit sale with cash back declines, have the cashier remove the cash back and run the purchase alone. That gives the issuer a chance to approve part of it.

HSA and FSA cards are capped by the account balance, and they often cover only the eligible items in a basket. That split needs its own POS support, so ask your provider how your system handles it.

Network Rules on Supporting Partial Authorization

These are network rules, not federal or state law and not one processor's preference. Your processor enforces them because Visa and Mastercard require it.

Visa. The rules are in section 7.3.9, "Partial Authorization," of the Visa Core Rules and Visa Product and Service Rules. Visa's service guide names U.S. automated fuel dispenser merchants that use real-time clearing as required participants. Chargebacks911's summary of Visa's 2024 authorization changes says Visa then began requiring merchants in certain merchant category codes (MCCs) to support partial authorization on debit and prepaid purchases.

An MCC is the four-digit code that classifies your type of business. The same summary warns that merchants who don't send the indicator can face added fees when a sale declines for insufficient funds. Ask your processor whether any such fee applies to you and what it's called, then look for it when you read your processing statement line by line.

Mastercard. Section 2.12 of the Transaction Processing Rules requires acquirers to support partial approval for merchants in a listed set of MCCs. The requirement covers card-present sales at attended terminals and at unattended terminals coded as automated fuel dispensers (MCC 5542) or electric vehicle charging (MCC 5552).

Both networks revise these lists. Your processor knows your MCC and how your account is set up, so ask in writing: "Does my MCC require partial authorization on Visa or Mastercard, and does my current terminal and gateway setup meet that requirement?" Even if your category isn't required, turning it on is often a settings change rather than a hardware purchase. Confirm that with your provider.

Handling Partial Approvals by Business Type

How a partial approval plays out depends on how you sell.

Grocery and convenience lanes see short prepaid and debit balances on large baskets every day. The fix is a screen that shows the approved amount and the balance due in large type, plus a cashier who knows to keep the sale open. Every second spent figuring out a confusing prompt adds to the line, which is why speeding up checkout lines starts with tender prompts staff can read at a glance. Our grocery market payment setup covers lane hardware.

Restaurants and bars run into tips. A card approved for exactly its remaining balance has nothing left for a tip added afterward. Visa's guidance for full-service settings is that the POS should print two receipts, with the partially approved transaction printed without a tip line. Servers should put the tip, or the rest of the check, on the second tender. See our restaurant and bar processing page for terminals that print at the table.

Fuel pumps and kiosks have no cashier to step in. Visa tells fuel merchants to dispense only the partially approved amount and shut the pump off at that limit. Under Visa's April 13, 2024 authorization changes, a fuel dispenser preauthorization must be completed or reversed within two hours of the approval. Self-service kiosks need the same discipline: limit the order to the approved amount or ask for a second payment.

Online checkouts are the least consistent. Many carts have no step for collecting a second payment method, so they treat a short card as a plain decline even when the gateway could accept a partial approval. If your cart can't take two tenders, leave the indicator off online and keep the full-or-decline behavior. That's better than accepting partial approvals your checkout can't complete.

At the counter, most failures come down to the cashier. One who sees "Approved" and hands over the bag has given away the balance due. Add partial approvals to your cashier training checklist for new hires. Teach staff to tell a partial approval apart from a true decline, which needs a different script, covered in what cashiers should say when a card is declined. A plain line works: "Your card covered $45.00 of this. The remaining $17.40 can go on another card or cash."

Reverse the Approval When the Sale Doesn't Happen

If the customer sees the balance due and decides not to buy, the partial approval still holds funds on their card. Visa's guide says the merchant should send an authorization reversal when the cardholder doesn't add funds and the sale is canceled. A reversal releases the hold. If you skip it, the approved amount can settle with your next batch, and you'll owe a refund. Refunds to prepaid cards can be slow to reach the customer.

Make voiding an abandoned split-tender sale part of the procedure, done before the batch closes. Then check that it's being done properly. POS exception reports for voids and no-sales show whether abandoned partials are being reversed and that voids aren't covering something else.

Test Your Partial Authorization Setup This Week

A spec sheet that lists "partial authorization" doesn't prove your whole system handles it. Test from the card read to the end-of-day report:

  1. Ask your processor whether partial authorization is enabled on your account and whether your MCC requires it on Visa or Mastercard.
  2. Check the settings on your terminal and in your gateway. Some ship with partial approval turned off.
  3. Buy a low-value network-branded prepaid card, spend part of it, then ring up a sale above the remaining balance. The screen should show the approved amount, show the balance due and ask for a second tender.
  4. Start a second split sale, cancel it after the partial approval, and confirm the reversal or void appears in your reports.
  5. Compare the receipt with the end-of-day report. Both should show two tenders that add up to the full sale.
  6. Repeat the test in your online checkout if you sell online.

If a step fails, find out whether the terminal, the POS software or the gateway is responsible before you replace anything. If you're buying equipment anyway, ask vendors to demonstrate a partial approval and a reversal on their smart terminals and payment gateways before you sign. To have someone review your current setup and MCC requirements, request a free quote from MannyPay. A specialist will respond within one business day.

The cheapest check is step 3. A prepaid card and a sale rung slightly above its balance will show you exactly what your register does with a shortfall.

Sources

  1. Visa Partial Authorization Service
  2. Visa Developer: Request and Response Codes
  3. Visa Core Rules and Visa Product and Service Rules (18 April 2026)
  4. Visa: Authorization Framework Will Be Updated to Simplify Authorization Processing Time Frames
  5. Mastercard Transaction Processing Rules
  6. Chargebacks911: Visa Authorization Rules
  7. Heartland Portico Developer Guide: Partial Authorization

About the author

Adrian Reyes

Adrian Reyes is Senior Payments & Fintech Editor for Beyond the Swipe, covering credit card processing, merchant accounts, payment technology and processing fees.

This article is for general educational purposes and is not legal, tax or financial advice. Card network rules and state laws change; confirm current requirements for your business.

Related reading